1. RS232 Converter
SB-DN-RS232N

2. Description
SB-DN-RS232N is the converter between buspro and RS232 system, realize that control the RS232 system from buspro system, and vice versa.

3. Function 2 control way: RS232(ASCll Code or HEX) -> Buspro
RS232(ASCII Code or HEX) <- Buspro
Support ASCII code and hexadecimal
24 Characters ASCII length.
RS232 interface works in all baud rates: 2400, 4800, 9600, 14400, 19200, 38400,
57600, bps
Send and receive ASCII command
It can receive 99 ASCII/HEX to trigger different targets

4. Connection

5. Basic information Subnet ID and Device ID Device remark
HDL is adding more and more protocols in it, so it is possible that customers don’t need to spend much time to configure it but just select the built-in protocol .
Device remark
Subnet ID and Device ID

6. Config serial port
Need to match with 3rd party system.

7. RS232HDL Buspro RS232HDL Buspro:
It can set up to 200 strings and 20 targets for each string.
Setup control targets in HDL system.
Setup strings

8. HDL busproRS232 7/23/2018 HDL BusproRS232:
It can set up to 200 strings and 20 targets for each string.
Setup inputs from HDL system
Setup output strings to be transfer to RS232 port

9. Test Using a tool to test the function (e.g., FormCom232.exe)
Tx window
Rx window

10. Test
Configure COM port
enable COM port

11. Test
Input a string
Send out the string
Get feedback from RS232 module