1. 12C(p,)13N Nuclear Reaction Rates  12C 13N Nuclear reactions
generate energy
create new isotopes and elements
Notation for stellar rates:
12C
13N p 
12C(p,)13N
The heavier “target”
nucleus (Lab: target)
the lighter “incoming projectile” (Lab: beam)
the lighter “outgoing particle” (Lab: residual of beam)
the heavier
“residual” nucleus (Lab: residual of target)
(adapted from traditional laboratory experiments with a target and a beam) 1

2. Example for a sequence of reactions in stars: the CN cycle
Ne(10)
Need reaction rates to:
establish existence of cycle
determine total rate of cycle
F(9)
O(8)
(p,)15O
(+)15N
N(7)
12C(p,)13N
(p,)14N
(p,)12C
(+)13C
C(6) 3 4 5 6 7 8 9
neutron number
Net effect: 4p ->  + 2e+ + 2ve
But requires C or N as catalysts (second and later generation star) 2

3. Sun
pp reaction chain: 3

4. The 4 CNO cycles 4

5. Competition between the p-p chain and the CNO Cycle
To understand this (and else): 5

6.  =  j 1. cross section  bombard target nuclei with projectiles:
relative velocity v
Definition of cross section:
# of reactions =  # of incoming projectiles
per second and target nucleus per second and cm2
 =  j
with j as particle number current density. Of course j = n v with particle number density n)
or in symbols:
Units for cross section:
1 barn = cm2 ( = 100 fm2 or about half the size (cross sectional area) of a uranium nucleus) 6

7. 2. Reaction rate in the laboratory
beam of particles
hits target at rest
area A
j,v
thickness d
assume thin target (unattenuated beam intensity throughout target)
Reaction rate (per target nucleus):
Total reaction rate (reactions per second)
with nT : number density of target nuclei I =jA : beam number current (number of particles per second hitting the target)
note: dnT is number of target nuclei per cm2. Often the target thickness is specified in these terms. 7

8. 3. Reaction rate in stellar environment
Mix of (fully ionized) projectiles and target nuclei at a temperature T
3.1. For a given relative velocity v
in volume V with projectile number density np
so for reaction rate per second and cm3:
This is proportional to the number of p-T pairs in the volume. If projectile and target are identical, one has to divide by 2 to avoid double counting 8

9. 3.2. at temperature T
for most practical applications (for example in stars) projectile and target nuclei are always in thermal equilibrium and follow a Maxwell-Bolzmann velocity distribution:
then the probability (v) to find a particle with a velocity between v and v+dv is
with
example: in terms of energy E=1/2 m v2
max at E=kT 9

10. Temperature in Stars
The horizontal axis is the velocity in cm/sec and the vertical axis is proportional to the probability that a particle in the gas has that velocity. 10

11. Maxwell-Boltzmann distribution
Boltzmann distribution = probability that any one molecule will be found with energy E:
If this distribution is applied to one direction of velocity for a molecule in an ideal gas, it becomes
Converting this relationship to probability in terms of speed in three dimensions: 11

12. Details of calculation:12

13. typical strong velocity dependence !
one can show (Clayton Pg ) that the relative velocities between two particles are distributed the same way:
with the mass m replaced by the reduced mass  of the 2 particle system
the stellar reaction rates has to be averaged over the distribution (v)
typical strong velocity dependence !
or short hand: 13

14. expressed in terms abundances
reactions per s and cm3
reactions per s and target nucleus
this is usually referred to as the stellar reaction rate of a specific reaction
units of stellar reaction rate NA<sv>: usually cm3/s/mole, though in fact cm3/s/g would be better (and is needed to verify dimensions of equations) 14

15. 4. Abundance changes, lifetimes
Lets assume the only reaction that involves nuclei A and B is destruction (production) of A (B) by A capturing the projectile a:
A + a -> B
Again the reaction is a random process with const probability (as long as the conditions are unchanged) and therefore governed by the same laws as radioactive decay:
consequently: 15

16. and of course
after some time, nucleus A is entirely converted to nucleus B
Example: A B
abundance
Y0A
same abundance level Y0A
Y0A/e 
time
Lifetime of A (against destruction via the reaction A+a) :
(of course half-life of A T1/2=ln2/ 16

17. 5. Energy generation through a specific reaction:
Again, consider the reaction A+a->B
Reaction Q-value: Energy generated (if >0) by a single reaction
in general, for any reaction (sequence) with nuclear masses m:
Energy generation
Energy generated per g and second by a reaction:
6. Reaction flow:
abundance of nuclei converted in time T from species A to B via a specific reaction 17

18. 7. Multiple reactions destroying a nuclide
example: in the CNO cycle, 13N can either capture a proton or  decay.
14O
(p,)
13N
(+)
each destructive reaction i has a rate i
13C
7.1. Total lifetime
the total destruction rate for the nucleus is then
its total lifetime
7.2. Branching
the reaction flow branching into reaction i, bi is the fraction of destructive flow through reaction i. (or the fraction of nuclei destroyed via reaction i) 18

19. 8. Determining nuclear reaction rates - Introduction
Needed is the cross section as a function of energy (velocity)
The stellar reaction rate can then be calculated by integrating over the Maxwell Boltzmann distribution.
The cross section depends sensitively on the reaction mechanism and the properties of the nuclei involved. It can vary by many (tens) orders of magnitude
It can either be measured experimentally or calculated. Both are difficult.
Experiments are complicated by extremely small cross sections that prevent direct measurements of the cross sections at the relevant astrophysical energies (with a some exceptions)
Typical energies for astrophysical reactions are of the order of kT
Sun T ~ 10 Mio K
Si burning in a massive star: T ~ 1 Bio K
There is no nuclear theory that can predict the relevant properties of nuclei accurately enough.
In practice, a combination of experiments and theory is needed. 19

20. Nuclear properties that are relevant for reaction rates:
Nucleons in the nucleus can only have discrete energies. Therefore, the nucleus as a whole can be excited into discrete energy levels (excited states)
Excitation energy (MeV)
Spin
Excitation energy
Parity (+ or - )
5.03
3/2
3rd excited state
4.45
5/2
2nd excited state
2.13
1/2
1st excited state
3/2
ground state 20

21. pnand Each state is characterized by: energy (mass) spin
parity
lifetimes against ,p,n, and  emission
The lifetime is usually given as a width as it corresponds to a width in the excitation energy of the state according to Heisenberg:
therefore, a lifetime corresponds to a width :
the lifetime against the individual “channels” for ,p,n, and  emission are usually given as partial widths
pnand
with 21

22. A Real Example 22

23. Basic reaction mechanisms involving strong or electromagnetic interaction:
Example: neutron capture A + n -> B + 
I. Direct reactions (for example, direct capture)
direct transition into bound states  En Sn
A+n B
II. Resonant reactions (for example, resonant capture)
Step 1: Coumpound nucleus formation (in an unbound state)
Step 2: Coumpound nucleus decay En   Sn 
A+n 23 B B

24.  or a resonant A(n,)B reaction:
Step 1: Compound nucleus formation (in an unbound state)
Step 2: Compound nucleus decay  En  Sn
A+n S C
B+ C B
For resonant reactions, En has to “match” an excited state (but all excited states have a width and there is always some cross section through tails)
But enhanced cross section for En ~ Ex- Sn
more later … 24