1. BLOODSTAIN PATTERN ANALYSIS TUTORIAL

2. Bloodstain Pattern Analysis:
the examination of the shapes, locations, and distribution patterns of bloodstains, in order to discover what events led to the blood loss
Based on the premise that all bloodstains and bloodstain patterns are characteristic of the forces that have created them.
Bloodstain Pattern Analysis:

3. What can we Learn?
*examine blood stain patterns at the scene of the crime

4. What can we Learn?
*from the clothing of people involved

5. What Can we Learn?
Confirm or refute assumptions concerning events and their sequence: Position of victim. (standing, sitting, lying)
Evidence of a struggle. (blood smears, blood trails)
Confirm or refute statements made by principals in the case: Are stain patterns on a suspect’s clothing consistent with his reported actions? Are stain patterns on a victim or at a scene consistent with accounts given by witnesses or the suspect?

6. Properties of Blood *5 to 6 liters of blood for males
*On average, accounts for 8 % of total body weight
*5 to 6 liters of blood for males
*4 to 5 liters of blood
for females
* A 40 percent blood volume loss, internally or/and externally, to cause incapacitated
Properties of Blood

7. The elastic like property of the surface of the liquid that makes it tend to contract, caused by the forces of attraction between the molecules of the liquid.
Surface Tension

8. The cohesive forces tend to resist penetration and separation.
Surface Tension

9. Categories of Bloodstains
PASSIVE

10. TRANSFER

11. PROJECTED

12. A transfer bloodstain is created when a wet, bloody surface comes in contact with a secondary surface.
A recognizable image of all or a portion of the original surface may be observed in the pattern, as in the case of a bloody hand or footwear.
TRANSFER BLOODSTAINS

13. Transfer Blood Stains

14. Transfer bloodstains can be further subdivided into:
Contact bleeding
Swipe or Smear
Wipe
Smudge

15. Passive Bloodstains are drops created or formed by the force of gravity acting alone.

16. This category can be further subdivided to include;
Drops
Drip patterns
Pools
Clots
Passive Blood Stains

17. "Dripped Blood“
LARGE VOLUMES OF BLOOD

18. "Spilled Blood"

19. "Projected Blood" (through syringe)

20. PROJECTED BLOODSTAINS
Projected bloodstains are created when an exposed blood source is subjected to an action or force, greater than the force of gravity. (Internally or Externally produced)
For Example:
A spurt of blood due to the pumping action of the heart
Blood leaves the body due to a force such as being hit with an object or shot
The size, shape, and number of resulting stains will depend, primarily, on the amount of force utilized to strike the blood source.
PROJECTED BLOODSTAINS

21. Blood spatter as a result of being struck by the pictured pipe.
Example:

22. Types of projected Blood Stains
*Arterial Spurt / Gush
Bloodstain pattern(s) resulting from blood exiting the body under pressure from a damaged artery:
Types of projected Blood Stains

23. Types of Projected Blood Stains
Cast-off Stains
Blood released or thrown from a blood-bearing object in motion:  
Types of Projected Blood Stains

24. Types of Projected Blood Stains
Impact Spatter
Blood stain patterns created when a blood source receives a blow or force resulting in the random dispersion of smaller drops of blood.
Types of Projected Blood Stains

25. 3 Types of Impact Spatter
Low Velocity
Medium Velocity
High Velocity
Velocity refers to how much force is used
3 Types of Impact Spatter

26. Bloodstains can occur on a variety of surfaces, such as carpet, wood, tile, wallpaper, clothing, and the list goes on……
The type of surface the blood strikes affects the amount of resulting spatter, including the size and appearance of the blood drops.

27. Surface Texture

28. TARGET SURFACE TEXTURE
Blood droplets that strike a hard smooth surface, like a piece of glass, will have little or no distortion around the edge.
TARGET SURFACE TEXTURE

29. TARGET SURFACE TEXTURE
Blood droplets that strike linoleum flooring take on a slightly different appearance. Notice the distortion (spikes) around the edge of the blood droplets.
TARGET SURFACE TEXTURE

30. TARGET SURFACE TEXTURE
Surfaces such as wood or concrete are distorted to a larger extent. Notice the spikes and secondary spatter present.
TARGET SURFACE TEXTURE

31. DIRECTIONALITY OF BLOODSTAINS
When a droplet of blood strikes a surface perpendicular (90 degrees) the resulting bloodstain will be circular.
The length and the width will be the same
Blood that strikes a surface at an angle less than 90 degrees will be elongated or have a tear drop shape.
DIRECTIONALITY OF BLOODSTAINS

32. DIRECTIONALITY OF BLOODSTAINS
The pointed end of the bloodstain ( tail ) will always point in the direction of travel.
DIRECTIONALITY OF BLOODSTAINS

33. IMPACT ANGLE DETERMINATION
ANGLE of IMPACT is the acute angle formed between the direction of the blood drop and the plane of the surface it strikes
IMPACT ANGLE DETERMINATION

34. How to Calculate the Angle of Impact
By accurately measuring the length and width of a bloodstain, the impact angle can be calculated using the SIN formula below
SIN < = Width (a) 1.5cm
Length (c) 3.0cm
Width (a) 1.5cm = SIN <
0.5 = SIN <
< = 30 degrees
How to Calculate the Angle of Impact

35. POINT OF CONVERGENCE AND ORIGIN DETERMINATION
What in the world does this mean?????
Convergence: where things come together
Origin Determination: Where something started
In other words: You can examine the blood stains and tell where the blood came from originally.
POINT OF CONVERGENCE AND ORIGIN DETERMINATION

36. POINT OF CONVERGENCE AND ORIGIN DETERMINATION

37. Area of convergence

38. 3 Dimensional Point of Origin

40. http://www.bloodspatter.com/BPATutorial. htm
Information From