1. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
A schematic drawing of a chevron-type PHE

2. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Schematic diagram of the experimental facility (1 = ice slurry generator, 2 = pump, 3 = insulation, 4 = ice slurry storage tank, 5 = drainage, 6 = pump, 7 = thermocouple, 8 = agitator, 9 = condensing unit, 10 = data acquisition system, 11 = rotameter, 12 = plate heat exchanger, 13 = pump, 14 = mass flow meter, 15 = water inlet, 16 = water outlet, 17 = sampling point, 18 = mass flow meter, 19 = thermocouple, 20 = pressure transducer, and V1, V2, V3, V4, V5, and V6 = valves)

3. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Dimensions of plate heat exchanger

4. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Variation of pressure drop with chilled water flow rate (comparison of predicted pressure drop with experimental data)

5. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of the predicted pressure drop (T-H model) with the experimental values in PHE (water to water)

6. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of predicted pressure drop with experimental data using PG as antifreeze with 10%, 20%, 30%, and 40% concentration: (a) variation of pressure drop with flow rate and (b) pressure drop versus Reynolds number

7. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of predicted pressure drop with experimental data using MEG as antifreeze with 10%, 20%, 30%, and 40% concentration: (a) variation of pressure drop with flow rate and (b) variation of pressure drop with Reynolds number

8. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of the predicted pressure drop (T-H model) with the experimental values (ice slurries) in PHE

9. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Variation of overall heat transfer coefficient with flow rate (comparison of predicted overall heat transfer coefficient with experimental data)

10. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of the predicted overall heat transfer coefficient (T-H model) with the experimental values in PHE (water to water)

11. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of predicted overall heat transfer coefficient with experimental data using PG as antifreeze with 10%, 20%, 30%, and 40% concentration: (a) variation of overall heat transfer coefficient with flow rate and (b) variation of overall heat transfer coefficient with Reynolds number

12. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of predicted overall heat transfer coefficient with experimental data using MEG as antifreeze with 10%, 20%, 30%, and 40% concentration: (a) variation of overall heat transfer coefficient with flow rate and (b) variation of overall heat transfer coefficient with Reynolds number

13. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Comparison of the predicted overall heat transfer coefficient (T-H model) with the experimental values (ice slurry) in PHE

14. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Heat Transfer and Pressure Drop Analysis of Chilled Water and Ice Slurry in a Plate Heat Exchanger
J. Thermal Sci. Eng. Appl. 2015;8(1): doi: /
Figure Legend:
Variation of cooling duty with flow rate: (a) ice slurry using PG as antifreeze and (b) ice slurry using MEG and antifreeze