Presentation is loading. Please wait.

Presentation is loading. Please wait.

Similar presentations


Presentation on theme: ""— Presentation transcript:

1

3 Topography Maps A map provides a representation of natural and artificial features. Shows you the ups and downs

4 Who cares??

6 Does this paint a 3-D picture?

7 Lines Elevation If you walk along a slope without going up or down you will be following a line on the same elevation or topographic line

8 Low water level The line is long and follows the outline of the island

9 Medium water level The line around the island is shorter

10 High water level The line is very short with only the very top showing.

11 All lines of elevation shown
Is is your map

12 Note the cross section Look at the steep slope on the right side

13

14

16 How high is the peak at D & C?
You must ask “what is the contour interval?” or space between contours 10 meter, 100 feet? This map shows 10 meters. The peak height is 30m plus. What if the interval is 200 meters.

17 If doesn’t matter what the interval is, closer is steeper, wider is flatter. How steep will be depend on the contour interval

18

19

20 What terrain is between A & C?
Flat > increasing slope > steeper > peak > shallower down slope > getting steeper as the drainage is crossed

21 Look at what you know, road- shoreline-penisula building-river- drainages- steep slope- peak height

22 road- shoreline-peninsula-building-river- drainages- steep slope- peak

23 Peak or hole?

24 Peaks on the left and depressions on the right

25 What do you see

26 What do you see

27 What do you see?


Download ppt ""

Similar presentations


Ads by Google