1. HY-WIRE CAR
PRESENTED BY
idoldear.com

2. ABSTRACT
HY-WIRE car is without mechanical and hydraulic linkage end engine. The defining characteristic of hy-wire is that it doesn’t have two things an engine and mechanical hydraulic linkage. It is fully automated car it is a future car. In future it will have wide application .The problem with fuel consumption and pollution can be minimize to certain level

3. INTRODUCTION
Cars are immensely complicated machines, but they do an incredibly simple job.
Most of the complex stuff in a car is decided to turning wheel
The two basic elements that largely dictate car design today are The internal combustion engine 2. Mechanical and hydraulic linkages

4. HY-WIRE BASICS
The defining characteristic of the Hy-wire is that it doesn’t have either of those two things: engine and mechanical and hydraulic linkages
Instead of an engine, it has a fuel cell stack
Instead of mechanical and hydraulic linkages, it has a drive by wire system

5. FUEL CELL –ON HY-WIRE
A fuel cell is an electrochemical energy conversion device that converts hydrogen and oxygen into water, producing electricity and heat in the process.
It provides a DC (direct current) voltage
It can continually recharge a fuel cell by adding chemical fuel- hydrogen for an onboard storage tank

6. Proton exchange membrane fuel-cell
The type of fuel cell that is used in the
Hy-wire car is the Proton exchange membrane fuel cell.
The four basic elements of a PEM fuel cell are:-
The anode, the negative post of the fuel cell
The cathode, the positive post of the fuel cell

7. Electrolyte The catalyst It is the proton exchange membrane .
It blocks electrons .
The catalyst
It is a special material that facilitates the reaction of oxygen and hydrogen.
It is usually made of platinum powder very thinly coated onto carbon paper or cloth.
It is rough and porous .
The platinum-coated side of the catalyst faces the PEM.

8. The working of PEMFC

9. DRIVE BY WIRE TECHNOLOGY
The ‘brain’ of Hy-Wire is a central computer housed in the middle of the chassis.
It sends electronic signals to
The motor control unit to vary the speed.
The steering mechanism to maneuver the car.
The braking system to slow the car down .
It is connected to an array of advanced sensors.
The computer is connected to the body’s electronics through universal docking ports.

10. X-Drive X-drive is the driver’s control unit .
It has two ergonomic groups , positioned to the left and right of a small LCD monitor.
The color monitor in the center of the controller displays speed, mileage, fuel level and the rear-view images from video cameras on the sides and back of the car, in place of conventional mirrors.
A second monitor, on a console beside the driver, shows you stereo, climate control and navigation information.

11. THE X-DRIVE CAN SLIDE TO EITHER SIDE OF THE VEHICLE

12. THE HYDROGEN TANKS AND FUEL-CELL STACK IN THE HY-WIRE

13. ADVANTAGES
1. Fuel efficient - a fuel cell vehicle could provide twice the fuel efficiency of a comparably sized conventional vehicle
2. Environment friendly - the only bi-product formed is water, which is a non-pollutant.
3. High stability - a low center of gravity, gives the architecture both a high stability and superior handling .

14. 6. Freedom of individual expression –
4. Highly spacious - As there are no linkages and engine lot of legroom space is available for the passengers.
5. Driver friendly –
X-Drive can be taken to anywhere inside the car
Gives the driver a clear view of the road and thus increases the drivability.
6. Freedom of individual expression –
freedom of individual expression

15. FUTURE OF HY-WIRE Fuel cells offer a promising alternative
They need to be compelling, affordable, and profitable.
The main challenge is in the field of storage of hydrogen

16. CONCLUSION
The Hy-wire concept has so profoundly brought about changes in the automotive industry
It can resolve the major fuel and safety issues
GM and other auto makers are planning
to launch such a vehicle for the public usage by the year 2020.

17. THANK YOU