Presentation is loading. Please wait.

Presentation is loading. Please wait.

HD POWER TRANSDUCER SERIES

Published byAldous Mills Modified over 6 years ago

Similar presentations

Presentation on theme: "HD POWER TRANSDUCER SERIES"— Presentation transcript:

1 HD POWER TRANSDUCER SERIES
Var TRANSDUCER MODEL HDK - MODEL & SUFFIX CODE SELECTION The VAR transducer Model HDK provides a DC output proportional to AC reactive power. * Little ropple : stable output * Input - output isolated MODEL HDK PHASE & WIRE VOLTAGE & AMPERE 1P2W 3P3W 3P4W PERFORMANCE Accuracy : 0.1% or 0.25% Temp.coefficient : 0.03%/C Insulation resistance : 100Mohm or more with 500V DC Response time : 0.4sec(400ms) Line Voltage effect : 0.1% with 10% change Ripple : 0.25% p-p max. (100/120Hz) Dielectric strength : 2000V AC 1minute input/output/power Surge withstand Voltage : 1.2/50sec, 5KV (INPUT to OUTPUT to GROUND) OUTPUT INSTALLATION Operating temperature : -5 to +55C Operating humidity : 20-80%RH(non-condensing) Mounting : Wall or DIN rail Power supply : AC 110V or 220V (-15/+10%) 50/60Hz,2VA Size : W75 H150 D113mm Weight : ORDERING INFORMATION Specify code number and variables * Code number : HDK-phase/wire-voltage/ampere-output ex : HDK-4AA * polarity 선택사양시 INPUT & OUTPUT INPUT * Voltage Side ( PT side ) Operational range : 0-110% Permissible over range : 150% for 10 seconds 120% continuously * Current Side ( CT side ) Operational range : 0-120% Permissible over range : 1000% for 5 seconds 150% for 10 seconds Frequency : 60 or 50Hz output Calibration polarity * Negative in LEAD * Positive in LAG GENERAL SPECIFICATIONS Construction : DIN housings Terminal access on front face Housing materiel : plastic(black) Wiring : 3.0M screw terminals Isolation : AC input/DC output/power Adjustments : zero and span 5% Over-range output = 0-120%

2 INPUT RANGE 1-PHASE/2-WIRE 1-PHASE/3-WIRE 3-PHASE/3-WIRE 3-PHASE/4-WIRE HOW TO DETERMINE Var RANGE Measuring Var Value(Var) = PT ratio  CT ratio  STANDARD RANGE[Var] Check that the required calibration range is within the available range in the table, specify this range when ordering. [example] 3-phase/3-wire , PT 3300/110V, CT 250/5A Measuring Var Value = 3300/110  250/5  500Var = 75KVar OUTPUT DC Current : 0-20mA DC Minimum span : 1mA zero bias : max. 1.5 Times of span LOAD resistance DC Voltage : 0-12V DC Minimum span : 5mV zero bias : max. 1.5 Times of span OUTPUT LOAD RESISTANCE IMPEDANCE 4-20mA 0-600 Ω 5M Ω or more 0-20mA 0-16mA 0-750 Ω 0-10mA Ω 0-1mA 0-12k Ω 0-5mA Ω OUTPUT LOAD RESISTANCE IMPEDANCE 0-10mV 10k Ω or more 1 Ω or less 0-100mV 100k Ω or more 0-1V 1k Ω or more 0-10V 0-5V 1-5V 5k Ω or more 10 Ω 100 Ω * for other ranges within 0-12V, use equation R = E/I where : R = load resistance (Ω) E = full-scale output (V) I = 1 mA

3 CONNECTION DIAGRAM DEMENSION & INSTRUCTIONS

Download ppt "HD POWER TRANSDUCER SERIES"

Similar presentations

Http://www.beluk.de.

Lecture Notes Part 4 ET 483b Sequential Control and Data Acquisition

Lecture Notes Part 4 ET 483b Sequential Control and Data Acquisition
1 ■ RTD INPUT 2 or 3 wire RTD ’ S input sensing : 2mA DC(pt) MODEL & SUFFIX CODE HD-GPMA MODEL ORDERING INFORMATION Specify code number and variables *

1 ■ RTD INPUT 2 or 3 wire RTD ’ S input sensing : 2mA DC(pt) MODEL & SUFFIX CODE HD-GPMA MODEL ORDERING INFORMATION Specify code number and variables *
MTE´s Portable Product Portfolio

MTE´s Portable Product Portfolio
1 5A 200A 6600V HOW TO DETERMINE LIE WATTAGE... WATT The standard voltage rating is 110V, the standard current rating is 5A, the transducer range is 1000W.

1 5A 200A 6600V HOW TO DETERMINE LIE WATTAGE... WATT The standard voltage rating is 110V, the standard current rating is 5A, the transducer range is 1000W.
Troubleshoot The AC Circuitry

Troubleshoot The AC Circuitry
TRANSFORMERS. TRANSFORMER PARAMETERS Turns Ratio (n) It is defined as the ratio of the number of turns in the secondary winding (N sec ) to the number.

TRANSFORMERS. TRANSFORMER PARAMETERS Turns Ratio (n) It is defined as the ratio of the number of turns in the secondary winding (N sec ) to the number.
Problem #2-8 A 480 – 120 V, 60 Hz transformer has its high voltage winding connected to a 460 V system, and its low voltage winding connected to a 24/32.8°Ω.

Problem #2-8 A 480 – 120 V, 60 Hz transformer has its high voltage winding connected to a 460 V system, and its low voltage winding connected to a 24/32.8°Ω.
INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator.

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator.
1 INPUT & OUTPUT ■ INPUT * Voltage Side ( PT side ) Operational range : 0-110% Permissible over range : 150% for 10 seconds 120% continuously * Current.

1 INPUT & OUTPUT ■ INPUT * Voltage Side ( PT side ) Operational range : 0-110% Permissible over range : 150% for 10 seconds 120% continuously * Current.
8000 SERIES INTEGRATED THE INTEGRATED REFERENCE SOLUTION PRECISION DIGITAL MULTIMETERS.

8000 SERIES INTEGRATED THE INTEGRATED REFERENCE SOLUTION PRECISION DIGITAL MULTIMETERS.
Calibration of I/P (current/Pressure) Honeywell Chapter 8 InstrumentationELC-213Today Presentation by Clifford T. Johnson, PE, Control Systems Engineer.

Calibration of I/P (current/Pressure) Honeywell Chapter 8 InstrumentationELC-213Today Presentation by Clifford T. Johnson, PE, Control Systems Engineer.
AC POWER ANALYSIS Instantaneous & Average Power

AC POWER ANALYSIS Instantaneous & Average Power
Controls and Electrical Preferred Technologies Steve Pavis PH-DT-DI CERN Advel Power Supplies and ABB Circuit Breakers.

Controls and Electrical Preferred Technologies Steve Pavis PH-DT-DI CERN Advel Power Supplies and ABB Circuit Breakers.
1 HD SIGNAL CONDITIONER SERIES THERMOCOUPLE TRANSMITTER MODEL HD-TC MODEL & SUFFIX CODE SELECTION HD-TC MODEL ■ Output1 signal ■ Output2 signal Availability.

1 HD SIGNAL CONDITIONER SERIES THERMOCOUPLE TRANSMITTER MODEL HD-TC MODEL & SUFFIX CODE SELECTION HD-TC MODEL ■ Output1 signal ■ Output2 signal Availability.
Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings.

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings.
Vadodara Institute of Engineering kotanbi-391510 Active learning Assignment on Single phase AC CIRCUIT SUBMITTED BY: 1) Bhatiya gaurang.(13ELEE558) 2)

Vadodara Institute of Engineering kotanbi Active learning Assignment on Single phase AC CIRCUIT SUBMITTED BY: 1) Bhatiya gaurang.(13ELEE558) 2)
1 SPECIFICATION Power : DC 24V ± 5% Input Signal : RS – 485 SERIAL Display: 4 DIGIT LED (H:10.16mm) Address Selection : POWER TO INPUT Isolation: POWER.

1 SPECIFICATION Power : DC 24V ± 5% Input Signal : RS – 485 SERIAL Display: 4 DIGIT LED (H:10.16mm) Address Selection : POWER TO INPUT Isolation: POWER.
1 HD SIGNAL CONDITIONER SERIES POWER DISTRIBUTOR TRANSMITTER MODEL HD-IPC MODEL & SUFFIX CODE SELECTION HD-IPC MODEL ■ Input signal ■ Output1 signal ■

1 HD SIGNAL CONDITIONER SERIES POWER DISTRIBUTOR TRANSMITTER MODEL HD-IPC MODEL & SUFFIX CODE SELECTION HD-IPC MODEL ■ Input signal ■ Output1 signal ■
Remote AI (Add 6 inputs/units, Max 48 inputs/recorder) VM7000A RS-485(Max 1200m) Remote AI (Max: 6 units) Recorder 12 CH Remote AI 6CH x 6units TTL: 48.

Remote AI (Add 6 inputs/units, Max 48 inputs/recorder) VM7000A RS-485(Max 1200m) Remote AI (Max: 6 units) Recorder 12 CH Remote AI 6CH x 6units TTL: 48.

Similar presentations

Ads by Google