1. FRESH Fruits & Vegetables are a part of our daily diet.
Fruits and vegetables are a part of our daily diet.
We prefer them fresh.
are a part of our daily diet.

2. L SS 30% BUT Unfortunately..
But unfortunately, we don’t always get this freshness, do we?
We are all already aware of the 30% post harvest losses we face each year.
This loss is faced by farmers, mediators, distributors , retailers, and end consumers.
Post harvest losses of fruits & vegetables in India

3. Reason..? No Infrastructure FOR POST HARVEST PROCESSING.
What is the reason?
One of the major reason for this loss, is that
There is no sufficient infrastructure available for post harvest processing.

4. 1 2 3 4 Pre- Cooling Cold Storage Dispatch Weighing Cleaning Grading
Sizing
Packaging
Pre- Cooling
Cold Storage
Dispatch
After any fruits or vegetables are harvested,
They need to go through all these processes.
Weighing , Cleaning, Grading, Sizing, Packaging, followed by Pre-Cooling , then Cold Storage,
and finally dispatch.
And we believe that facilities for these processes should be made available at the point of origin. 1 2 3 4

5. This is where Seepra refrigeration comes into picture.
We provide this infrastructure.
Since 1994, we are undertaking turnkey projects for post harvest processes.

6. PROJECTS’ METHODOLOGY
Installation
Installation of
PUF panels
Supply
Commissioning
EXECUTION
Layout & room sizes
Periodic
system
checks
Process
AFTER SALES SERVICE
Requirement
DESIGN
Calibration
This is how we go about, when we take up a project.
First, the design part. Based on your product and process requirements, we design a layout for your area.
Then comes the execution part, which starts with installation of PUF panels. We manufacture PUF sandwich panels at our unit.
It’s followed by selection, supply, complete installation and commissioning of the refrigeration equipment.
Thorough periodic system checks, timely calibration of the instruments and repair or replacement of necessary parts, is included in our after sales service.
Product
Requirement
Parts
Repair/Replacement
PROJECTS’ METHODOLOGY

7. HOLDING ROOM Now, lets have a look at our products..
Going by the procedure of post harvest processing, after weighing the inward material,
It has to be kept in the holding room, at specific temperature and relative humidity.
The holding room is designed according to the volume of the product and its temperature and humidity requirements.
Approximately 30% more than the daily processing volume of product, is stored in the holding room.
HOLDING ROOM

8. Packhouse.
The processes of grading, sizing, box packaging, labeling, and palletization for pre-cooling are carried out in a packhouse.
The packhouse, with proper hygiene maintained inside, has speed regulated conveyors, a fresh air circulation and humidity regulation system and
sufficient lighting, all this in consideration with the total work force.
The material handling capacity of the conveyors are based on the capacity of the pre-cooling chamber.
PACKHOUSE

9. PRE – COOLING CHAMBER Pre cooling chamber.
Pre –cooling means removing the field heat from the produce, in specific time, to increase the shelf life drastically.
This is done through forced draft cooling, in which air is sucked through palletized boxes.
The capacity is based on the volume of the product.
Pre-cooling is a batch process, wherein chambers are designed as per batch volume, like 5 ton, 6 ton, 10 ton , and so on, and are constructed with high density
PUF insulated panels.
PRE – COOLING CHAMBER

10. COLD STORAGE Cold Storage.
The cold storage is designed to hold the material at a desired temperature.
The main part of a cold storage is accuracy in temperature and humidity 24 x7.
The room is insulated with high density PUF panels.
The capacity again depends on the volume of the product to be stored.
COLD STORAGE

11. PLANT ROOM Plant room, machinery.
Trouble free working of the refrigeration equipment is the right of each customer.
For smooth functioning of pre-cooling and cold storage, sturdy refrigeration equipment is necessary.
These machines are fully automatic, like a home refrigerator.
After power failure, when the power comes on again, the equipment restarts itself and restores the prevailing temperature and humidity conditions.
PLANT ROOM

12. Sturdy, Durable refrigeration equipment
Sturdy and durable machinery is selected and installed in the plant room.
We have successfully completed around 350 turnkey projects till date.
Sturdy, Durable refrigeration equipment

13. Refrigeration system for IQF
Food processing projects.
We also undertake turnkey projects for Food Processing.
We have completed the design, installation and commissioning of an IQF project,
for 5000 Kg of product per hour; the refrigeration capacity being 700kW. We have used Howden make screw compressor, with
600 kW motor, and Ammonia as the refrigerant.
Refrigeration system for IQF

14. The project included a fully automatic control panel with a capacitor bank.

15. WE Believe in Serving to grow, and Growing to serve.
At Seepra Refrigeration, we believe in Serving to Grow and Growing to Serve.
Integrity, teamwork, and customer focus are our core beliefs.
in Serving to grow,
and Growing to serve.

16. Product range:
Vegetables, cut flowers, fruits;
Dairy products, chocolates, confectionery, ice creams;
Medicines, vaccines, bulk drugs.
Chicken, meat, fish,
And food processing.