1. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Schematic of test tank

2. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Detailed view of jet nozzle (dimensions in meters)

3. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Thermistor and RTD locations in the test tank (dashed line corresponds to interface location at 26.5% fill level; coordinates are in meters)

4. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Schematic of the experimental apparatus

5. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Reproducibility of the experimental data: pressure (a) and temperature (b)

6. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of heat input on ullage pressure (a) and ullage temperature (b) during self-pressurization (liquid fill level = 26.5%)

7. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of liquid fill level on ullage pressure (a) during self-pressurization. Inset of the pressure response (b) (heat load = 2 W).

8. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of liquid fill level on ullage temperature (a) during self-pressurization. Inset of the temperature response (b) (heat load = 2 W).

9. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Temperature profiles along the outer tank wall (liquid fill level = 50.0%, heat load = 2 W)

10. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of axial jet mixing on ullage pressure (a) and ullage temperature (b) (liquid fill level = 26.5%, heat load = 2 W, and jet speed = 0.241 m/s)

11. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of jet speed on ullage pressure (a) and ullage temperature (b) (liquid fill level = 26.5%, heat load = 2 W, and jet temperature = 293.2 K)

12. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of jet subcooling on ullage pressure (a) and ullage temperature (b) (liquid fill level = 26.5%, heat load = 2 W, and jet speed = 0.241 m/s)

13. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Temperature profiles along the outer tank wall (liquid fill level = 50.0%, heat load = 2 W, jet speed = 0.241 m/s, and jet temperature = 293.2 K)

14. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of heat input on ullage pressure during subcooled jet mixing (liquid fill level = 26.5%, jet speed = 0.241 m/s, and jet temperature = 293.2 K)

15. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Effect of liquid fill level on ullage pressure during subcooled jet mixing (heat load = 2 W, jet speed = 0.241 m/s, and jet temperature = 293.2 K

16. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Pressure (a) and temperature (b) histories (fill level = 26.5%, heat load = 2 W, jet speed = 0.421 m/s, jet temperature = 293.2 K

17. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Temperature contours at various times during self-pressurization and subcooled jet mixing: (a) Self-pressurization, ΔTmax = 0.708 K, ΔTmin = 0.052 K. (b) Self-pressurization, ΔTmax = 1.126 K, ΔTmin = 0.273 K. (c) Subcooled jet mixing, ΔTmax = 0.772 K, ΔTmin = -1.502 K. (d) Subcooled jet mixing, ΔTmax = 0.528 K, ΔTmin = -1.788 K.

18. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Temperature histories in the liquid (a) and vapor (b) (fill level = 26.5%, heat load = 2 W, jet speed = 0.421 m/s, and jet temperature = 293.2 K)

19. Date of download: 10/31/2017
Copyright © ASME. All rights reserved.
From: Investigation of Tank Pressurization and Pressure Control—Part I: Experimental Study
J. Thermal Sci. Eng. Appl. 2013;5(4): doi: /
Figure Legend:
Comparison of predicted and measured pressure reduction time