1. Working plan for 2017 Acquisition and Control Electronics
BE-BI Beam Wire Scanner
Working plan for 2017 Acquisition and Control Electronics
J. Emery for the wire-scanner Inputs from Federico, Patrik & Jose

2. Work plan for the electronics
BE-BI Beam Wire Scanner
May
Jun
July
Aug
Sep
Oct
Nov
Dec
Power boards
Inverter v1 test
Power bench
Inverter firmware
Tests and validations
Tests new drive
Control board
VFC mezzanine design
BWS firmware VFC
Intelligent drive
Design office
Assembly and tests
Production 3 units
Acquisition sensor
PMT SPS
4xPMT PSB
Review
New sensor investigation?
Tests new acquisition
Acquisition electronics
Investigations
Design
Control design & prototypes tests
New brake
New resolver
FPGA based

3. Electronics system usage for 2017
BE-BI Beam Wire Scanner
Ready for mid-June to be installed when machine TS
FPGA control
As needed for MD
FPGA control
DSPACE control
FPGA control
Power unit
Acquisition proto + oscilloscope
Power unit
Power unit
oscilloscope
SPS prototype LSS5
PSB prototype
Calibration & mechanical bench 867
Wire-scanner electronics lab 865

4. Motor Inverter and Cap.charger board status
BE-BI Beam Wire Scanner
Motor Inverter and Cap.charger board status
Motor Inverter Board
Recived and under test.
Will need 1 week more for basic functional test.
week’s of firmware test.
- Second stage is to build up a labview
test system. Which is needed because no
access to the Dspace system. Is around 2 weeks programming and then 1 week test.
But the board need to be tested with Dspace and the motor, as soon as possibly( August maybe?).
This is needed for to be able to do a stress test.
Cap.charger.
Under production, could be ready
end of next week 19/05.
The it will need 1-2 week’s of testing.
Slide from Patrik Andersson

5. Intelligent drive integration
BE-BI Beam Wire Scanner
Intelligent drive integration
The integration will start in July 2017.
Missing mechanically part’s is following.
- Support Motor inverter board
Baseplate for the 19” box.
VFC & Meazzine mechanic unit.
Front panel and back panel,
first design done but need to be update for the VFC & Meazzine unit.
All this need to be designed and manufactured under May and June.
Slide from Patrik Andersson

6. Current situation and main 2017 milestones
BE-BI Beam Wire Scanner
Slide from Jose Sirvent