1. NMC-A Series Components For Automotive Applications
Automotive Grade - Ceramic Capacitors MLCCs
NMC-A Series
Automotive Grade MLCCs
AEC-Q200 qualified components from TS certified production site; “QYF” part number suffix
Produced and tested on MLCC production lines dedicated to automotive component manufacturing. Quality initiatives include tightened process controls (casting, printing, and dicing) for improved margin control, and higher level test and inspection, to assure high quality components for automotive applications. Ultra-stable NPO and high capacitance X7R temperature coefficients (TCCs) meets AEC-Q200 Grade ‘1’ requirements. Extended voltage ratings, from 10VDC to 630VDC, are ideally suited for use in higher voltage applications, such as ballasts for HID lighting.
CASE SIZES: 0402, 0603,
0805, 1206 & 1210
Temperature Coefficient
NPO
X7R
Capacitance Range
0.5pF ~ 0.01uF
100pF ~ 1uF
Capacitance
Tolerance
±0.05pF (A), ±0.10pF (B) ±0.25pF (C), ±0.5pF (D) & ±5% (J)
±10% (K)
±20% (M)
Operating Temp
-55°C ~ +125°C
TC (ΔC)
0 ±30ppm/°C
±15%
Rated Voltages
10V, 16V, 25V, 50V, 100V, 200V, 250V, 500V & 630V
Automotive Electronics Applications:
Cruise control
Display & dash board electronics
Entertainment
Heating and AC controls
HID Lighting ballast
In-vehicle Infotainment systems (IVI)
Navigation - GPS - Compass
Power windows and door locks
Proximity sensors
Remote keyless entry systems (RKE)
Seating controls
Telematics
Wireless communications
Competitor
Cross Reference
Competitor
Series
AVX
xxxxxCxxxx4xxA (4 = Automotive)
EPCOS - TDK
CGAxxx_ B, C, D, E, M,
KEMET
CxxxxC/F/S/X/Yxxxxxx AUTO
MURATA
GCM, GCJ, GCG, GC3
TAIYO YUDEN
EMR, HMK, LMR, TMR, UMR
Page 1

2. NMC-A Series Components For Automotive Applications
Automotive Grade - Ceramic Capacitors MLCCs
NMC-A Series
Automotive Grade MLCCs
Packaging Codes:
C = 7” paper tape
D = 13” paper tape
E = 7” embossed plastic tape
F = 13” embossed plastic tape
NMC-A Series
PN: NMC-A __________3QYF
3QY = Automotive production lines at TS site (Taiwan) and AEC-Q200 qualification
Page 2

3. AUTOMOTIVE GRADE COMPONENTS
Components For Automotive Applications
AUTOMOTIVE GRADE COMPONENTS
Aluminum Electrolytic
Capacitors
SMT
Radial LDD
Liquid Construction
& Hybrid Construction
MLCC
Ceramic
Capacitors
SMT
NPO & X7R
0.5pF  1uF
10V  630V
0402  1210
Sizes
Thick Film
Thin Film
Resistors
SMT
Sulfur Resistant Construction
Low Noise, Precision TCR & Tolerances
Ferrite Chip Beads
SMT
EMI Suppression
Std & High Current Ratings
Molded Case Power Inductors
SMT
High Current,
Vibration Resistant
Construction
See all Auto Grade Products:
Page 3