1. MKTG 2016

2. Solutions for outdoor applications
E VIS

3. E VIS solutions for outdoor applications
Perfect protection of the internal components by environmental factors, extreme temperatures, direct sunlight, harsh environments, vandalism and atmospherical, chemical and mechanical agents.
Natural ventilation
Thermal management
Special insulation on request
Technical support for the choice of the most proper ventilation/conditioning unit

4. Wide range
Monobloc structure manufactured from mild steel, aluminium alloy or stainless steel (on request).
Special manufacturing concept (single or double-wall)
Silicone gasket
Special paint finish
Mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments / Aluminium alloy version: Special painting processwith a single polyester powder coating with zinc base (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth).

5. Manufacturing concept
Single wall
Double wall

6. Technical close-up
Thanks to a new design, the side covers are assembled and secured without any screw.
Double-walled frontal door + louvers on the roof + natural ventilation for an easier thermal management of the enclosure

7. Technical close-up
Only 3 screws are needed to assemble the hinged roof to the monobloc structure.
No point of access from outside when the door is closed. Locking system with key.
Big cable entry and fast assembly of the plinth frontal crosspiece for easy wiring