1. Date of download: 10/28/2017
Copyright © ASME. All rights reserved.
From: Sintering Behavior of (La,Sr)MnO3 Type Cathodes for Planar Anode-Supported SOFCs
J. Fuel Cell Sci. Technol. 2006;3(4): doi: /
Figure Legend:
Schematic view of the cross section of the modified specimen holder including (1) upper part and (2) lower part of the specimen holder, (3) SOFC (A: anode; E: electrolyte, C: cathode), (4) gasket, (5) gas inlet, (6) cut-outs, (7) O-ring seals, (8) upper, and (9) lower gas compartment. Gas distribution is rotationally symmetrical from the dashed lines 10 (axis of symmetry) to 11.

2. Date of download: 10/28/2017
Copyright © ASME. All rights reserved.
From: Sintering Behavior of (La,Sr)MnO3 Type Cathodes for Planar Anode-Supported SOFCs
J. Fuel Cell Sci. Technol. 2006;3(4): doi: /
Figure Legend:
Current–voltage curves for a 16cm2 single cell with an LSM/YSZ-type cathode functional layer and a LSM cathode current collector layer (sintering temperature: 1120°C) as a function of the temperature (fuel gas: H2(3%H2O)=1000ml∕min, oxidant: air=1000ml∕min)