WEATHER VOCAB (Advanced) Animated balloon floats into distance

WEATHER VOCAB (Advanced) Animated balloon floats into distance
To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Meteorology The study of Earth's atmosphere and how it changes
Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Atmosphere The layers of gases that surrounds a celestial body

Weather The short term conditions of Earth's atmosphere at a given time and place Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Climate The composite or generally prevailing weather conditions of a region, as temperature, air pressure, humidity, precipitation, sunshine, cloudiness, and winds, throughout the year, averaged over a series of years. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Air Pressure The weight (or force) of the atmosphere at any particular point. Although you can't feel it or see it, air pressure plays an important part in weather Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Humidity Generally, a measure of the water vapor content of the air. Popularly, it is used synonymously with relative humidity. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Relative Humidity- A ratio, expressed in percent, of the amount of atmospheric moisture present relative to the amount that would be present if the air were saturated. Since the latter amount is dependent on temperature, relative humidity is a function of both moisture content and temperature. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Dew Point As the surface of the earth cools at night, warm moist air near the ground is chilled and water vapor in the air condenses into droplets on the grass and other objects. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

LAYERS OF THE ATMOSPHERE

Troposphere The lowest region of the atmosphere, bound by Earth's surface and the tropopause and characterized by temperatures that decrease with altitude. Weather and most cloud formation occur in here Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Stratosphere The layer of Earth's atmosphere lying above the troposphere and below the mesosphere to about 31 miles(50km) above the Earth's surface. Temperatures rise slightly with altitude Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Mesosphere The layer of the Earth's atmosphere lying above the stratosphere and below the thermosphere, from about 31 to 51 miles(50 to 80km) above Earth's surface. The temperatures decrease with altitude Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Thermosphere The outermost layer of Earth's atmosphere, lying above the mesosphere and extending hundred of miles into outer space. Includes the exosphere and most of ionosphere. Temperature increases steadily with altitude Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Ionosphere Lower region of thermosphere which contains ions and reflects radio waves back to earth Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Ozone Layer Lower portion of stratosphere From about 12 to 19 miles up. Varies seasonally and geographically High concentration of ozone (O3) Absorbs about 98% of the Sun's UV(B) radiation Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Clouds A visible collection of particles of water or ice suspended in the air, usually at an elevation above the earth's surface.any similar mass, especially of smoke or dust. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Cirrus Clouds High clouds, usually above 18,000 feet, composed of ice crystals. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Cumulus Clouds A cloud in the shape of individual detached domes, with a flat base and a bulging upper portion resembling cauliflower. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Stratus Clouds Flat, hazy, featureless clouds of low altitude varying in color from dark gray to nearly white. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Air Mass Large body of air that takes on the characteristics of the area over which it forms, can be described by its stability, temperature, and humidity. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Anemometer Weather instrument used to measure wind speed (Advanced)

An instrument used to measure humidity.
Hygrometer An instrument used to measure humidity. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Barometer Weather instrument used to measure air pressure (Advanced)

Front Boundary between two air masses of differing densities can be cold or warm, stationary or occluded and can stretch over large areas of Earth's surface Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Cold Front The forward edge of an advancing mass of cold air that pushes under a mass of warm air. A cold front is often accompanied by heavy showers or thunderstorms. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Warm Front The boundary between a warm air mass and the cold air above which it is rising, at a less steep angle than at the cold front Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Stationary Front A pair of air masses, neither of which is strong enough to replace the other. They tend to stay in one place for a long period of time. Weather associated with are clouds, prolonged precipitation, and storm trains. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Low Pressure An area where the atmospheric pressure is lower than that of the area surrounding it. Lows are usually associated with high winds, warm air, and atmospheric lifting. Because of this, lows normally produce clouds, precipitation, and other bad weather such as tropical storms and cyclones. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

High Pressure An area where the atmospheric pressure is greater than that of the surrounding area. Absence of clouds means higher highs and higher lows. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

Low Pressure An area where the atmospheric pressure is lower than that of the area surrounding it. Lows are usually associated with high winds, warm air, and atmospheric lifting. Because of this, lows normally produce clouds, precipitation, and other bad weather such as tropical storms and cyclones. Animated balloon floats into distance (Advanced) To reproduce the balloon on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop. On the Home tab, in the Slides group, click Layout, and then click Blank. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following: In the Rotation box, enter 133⁰. In the Width box, enter 1.7”. In the Height box, enter 1.66”. Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider. In the Angle box, enter 90. In the Type list, select Linear. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Transparency box, enter 0%. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Position box, enter 13%. Select the next stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left). In the Position box, enter 66%. Select the last stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle. Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line. Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following: In the Height box, enter 0.16”. Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). In the Rotation box, enter 8⁰. In the Width box, enter 0.11”. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line. Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve. Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop. On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt. Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following: On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval. Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle. In the Shape Height box, enter 1.2”. In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Shape Width box, enter 1.2”. Click the button next to Direction, and then click From Center (third option from the left). In the Type list, select Radial. In the Position box, enter 0%. In the Position box, enter 50%. In the Transparency box, enter 81%. In the Position box, enter 71%. Position the oval at the top, left edge of the teardrop to create a lighting effect. Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line. In the Transparency box, enter 100%. Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK. On the slide, select the balloon and drag it off the bottom left corner of the slide. On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Duration box, enter 32. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%. Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following: To reproduce the background on this slide, do one of the following: Save the file as a JPEG (.jpg) file format. Right-click the sky background on the original template, and then click Save Background. In the Insert Picture dialog box, select a picture, and then click Insert. On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

WEATHER VOCAB (Advanced) Animated balloon floats into distance

Similar presentations

Presentation on theme: "WEATHER VOCAB (Advanced) Animated balloon floats into distance"— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

WEATHER VOCAB (Advanced) Animated balloon floats into distance

Similar presentations

Presentation on theme: "WEATHER VOCAB (Advanced) Animated balloon floats into distance"— Presentation transcript:

Similar presentations

About project

Feedback