1. Passive Solar Design Elements

2. Building Orientation
Correctly orienting a building can maximize solar heat gain in the Winter.

3. Building Orientation
Today's passive design solar home is based on exactly the same principles.
When sunlight falls on or in a house, it is converted to heat- so the business end of a home, at least from an energy perspective, is the south side.

4. Building Orientation
If possible, the longer axis of the building, also known as the ridge line, should be oriented east/west.
The longer dimension of your home faces sunny south.
The optimum position for maximum solar benefits is true south but you can vary the orientation within 20 degrees of that direction with minimal effect.

5. Building Orientation
The sun rises in the east and sets in the west. the sun is higher in
The summer sky and lower in the winter sky.
the key to good solar design is to face it south.

6. Building Orientation
If possible, the longer axis of the building, also known as the ridge line, should be oriented east/west.
The longer dimension of your home faces sunny south.
The optimum position for maximum solar benefits is true south but you can vary the orientation within 20 degrees of that direction with minimal effect.

7. Climates

8. Earth Sheltering
Correctly orienting a building can maximize solar heat gain in the Winter.
Reduce solar heat gain in the Summer.
Encourage cooling with prevailing winds
Minimize exposure to cold winter winds.

9. Thermal Insulation
Insulate and seal a building against air infiltration
Money spent on insulation is always recovered in a couple of years
Reduces heat flow
Increased comfort level
Improves acoustic qualities

10. Glazing
Historically a weak point in the construction of energy efficient buildings compared to todays glass
Admit daylight
Provide solar heating
Insulate against extreme temperatures

11. Glazing
The effectiveness of direct solar gain systems is significantly enhanced by insulative (e.g. double glazing), spectrally selective glazing (low-e), or movable window insulation (window quilts, bifold interior insulation shutters, shades, etc.).
Generally, Equator-facing windows should not employ glazing coatings that inhibit solar gain.

12. Exterior colors reflecting - absorbing
Materials and colors can be chosen to reflect or absorb solar thermal energy

13. Exterior colors reflecting - absorbing

14. Thermal mass
Is the ability of a material to absorb and store heat energy. A lot of heat energy is required to change the temperature of high density materials like concrete, bricks and tiles. They are therefore said to have high thermal mass. Lightweight materials such as timber have low thermal mass.