1. Autocharging norm № i/o Name of gds Thickness (mm) Density of plate
(kg/m3)
Size of the sheet
Pallets
Eurotruck
Weight
(tare), kg
Width
Length
Number of plates M2 M3
Weight netto, kg
Weight brutto, kg
Number of pallets 1
MDF 3
880
2800
2070
138
799,85
2,40
2112
2266 9
7198,63
21,60
20394,00
155 2 5
830 88
510,05
2,55
2116
2271
4590,43
22,95
20439,00 6
850 72
417,30
2,50
2128
2283
3755,81
22,53
20543,85
154 4 8
820 54
312,90
2053
2208
2816,86
19867,81 10
780 48
278,21
2,78
2168
2322
2503,87
25,04
20898,00 12
790 40
231,80
2198
2332
2086,56
20988,29
134 7 16 30
173,80
1564,92 18 26
150,70
2,71
2143
2277
1356,26
24,41
20493,77 19
2,86
2262
2396
25,77
21565,22 22
127,50
2,81
2188
1147,61
25,25
20900,65 11 25
760 20
115,90
2,90
2202
2337
1043,28
26,08
21030,02 28
755
104,30
2,92
2205
2340
938,95
26,29
21057,14 13
92,74
2114
2249
834,62
20237,13 14 38
730
81,14
3,08
2248
2382
730,30
27,75
21438,00
04070
Ukraine
Str. P.Sagaydachnogo 11
Tel. / Fax:

2. Autocharging norm
The company has established infrastructure - own railway tracks with access to Railway station. Delivery of production is carried out in any point of Ukraine by railway and by car.
Packaging and labeling
MDF sheets are packaged in packs (at the bottom of the pack - skid sheet on top - a cardboard sheet), tied with durable plastic tape. Each pack is marked with the label.
Driving package
1. The pack is mounted on a backing sheet and wooden sticks on plate format (2800h2070 mm);
2. The top of the stack covered with corrugated cardboard 2800h2070 mm;
3. Packaging contracted four transverse zones of the PET tape (except for 3 mm, where five zones);
4. Package weight maximum of 170 kg.
Types of transport
Motor vehicles;
Boxcars.
Recommendations for storage and warehousing of MDF
- A well-ventilated warehouses, maintain a relative humidity of 45 to 75% at temperature of +10 to +40 deg C. Topping raw or wet floor with plastic wrap for
prevent the entry of moisture into the MDF-plate
- Obkladyvat packs below and above the substrate to remove the effects of adverse weather conditions and the environment during transport or long storage
- Cover the faces and edges of plates protective coatings to protect the MDF from moisture and heat
- To lay the sheets horizontally, with vertical storage of a small number of sheets to comply strict vertical position and stability
- To lay the sheets aligned to each other in order to prevent damage to the edges and corners of chipping
- Store plates in packs foot height restriction of 4.5 meters with the separation of packs gaskets
- Lay on the bottom of a stack of flat podstopnoe place on bars-pad or tray
- To lay the pack across the dry bars of uniform thickness (width and thickness of shims should be not less than 80 mm; thickness difference pads used for one pack, should not exceed 5 mm)
- To lay the bars at intervals of not more than 600 mm, the distance from the extreme ends of the stack of gaskets should be not more than 200mm (the number of bars must be at least three) for the distance between the thin plates bars can be less
- Align the location of spacer bars vertically (gasket separating the stack must located in the same vertical plane one above another strictly).
04070
Ukraine
Str. P.Sagaydachnogo 11
Tel. / Fax: