1. EEE368 Coordinators: 1. Mdm Norhidayatul Hikmee bt Mahzan
Room: Sarjana BA1139
2. Ms Nur Syahirah bt Kamarozaman
Room: Sarjana BA1219

2. Course Outline Assessment Supervisor Final report 30% Logbook 40%
Panels
Project Presentation & Demo
Total
100%

3. FACULTY OF ELECTRICAL ENGINEERING UNIVERSITI TEKNOLOGI MARA
TERENGGANU
COURSE OUTLINE
Programme : Diploma Electrical Engineering
Course Code : EEE 368
Course : Final Year Project 2
Credit Unit : 3
Contact Hour : 3
Part : 5
Course Status : Core
Prerequisite : Final Year Project 1 (EEE368)
COURSE DESCRIPTION
The course involves literature survey, planning, design, circuit analysis and fabrication of an electronic project. This course is a continuation of Final Year Project I (EEE358) in part 4. Students are required to carry out the project and continuously presented the progress to their respective supervisor.
COURSE OUTCOMES (CO)
a. Apply electrical and electronics theoretical knowledge.
b. Develop and troubleshoot a suitable electronic engineering project
c. Work as a team.
Develop presentation skills and write a proper project report
THE COURSE ASSESSMENT
Supervisor
Logbook
40%
Final Report
30%
Panel
Project Presentation & Demo

4. Final Year 2 Project Blog
eee368.wordpress.com
Final Year 2 Project Blog

5. Important! Registration group : T- EE1115A Entrance survey – i-learn
CDIO survey – online “eee368.wordpress”

6. CDIO
CDIO is an innovative educational framework stressing engineering fundamentals in the context of conceiving- designing-implementing and operating real world systems and product
C - Conceiving (FYP1)
D – Designing (FYP1)
I - Implementing (FYP2)
O – Operating (FYP2)

7. Attendance Meet supervisor – minimum once/ week.
Marks for attendance (10%).
Attendance < 80% - FAIL
Please bring your logbook when meeting your supervisor and record all your activities in your logbook.

8. Students and Supervisor
Project calendar EEE368 No
Activities
Date
Week
PIC 1.
Student register course for EEE368 and purchase the FYP2 handbook
4 December 2016 1
Students
Coordinator 2.
Students attend briefing for FYP2 course from FYP2 coordinator
15 December 2016 3 3.
Student register course for EEE368
Group : T- EE1115A
Before 18 December 2016 4 4.
Student submit first draft to supervisors
-Format: guidelines on FYP2 handbook)
-Contents: Chapter 1 & Chapter 2
1 January 2017 5 5.
Student submit Second draft to supervisors
-Contents: Chapter 3
8 January 2017 6 6.
MID SEM BREAK (1 WEEKS)
27 January– 4 February 2017  7.
Students submit Final draft thesis to Supervisor.
12 February 2017 10
Students and Supervisor 8.
Student makes correction based on comment from project supervisor
Within week 10 to week 11 - 9.
Students submit final draft thesis
19 February 2017 11
10.
FYP2 Final Presentation
27 February-28 February 2017 12
11.
Students make correction based on comments from panels during presentation.
 Week 12 to week 14
12.
Final report submission
12 Mac 2017 14

9. First Progress Meeting
Will be held on –
Expected outcome:
Components on Breadboard
PCB layout (OrCAD or other software)
Slide power point (progress work)
1 copy First draft technical paper
1 copy First draft hard cover report (submit to your supervisor)

10. Second Progress Presentation
Will be held on Week 10 (12 February -16 February 2017)
Expected outcome:
PCB board ( complete : etching and soldering)
Sample of prototype
Slide power point (progress work)
2/3 copies Second draft technical paper
Sample of A1 poster

11. Components on Breadboard

12. Sample of schematic

13. Sample of PCB gerber file

14. Sample of PCB layout

15. Sample of PCB board (complete)

16. Sample of prototype

17. Sample of PCB board (not complete)

18. Sample of PCB board ( not complete)

19. Presentation Project must be completed by Week 12
Students who did not meet supervisor , meet <80% or did not submit final draft report will not be allowed to present.
Compulsory in order to pass this FYP.
Open presentation
Time given only 15 minutes – 10min (present), 5min (Q&A).
Slides should be very simple. Do not read you slides

20. Final Presentation
Will be held on Week 12 (27 February-28 February 2017)
Expected outcome:
complete final project ( including prototype)
A1 poster
Technical paper (format refer blog eee368.wordpress.com

21. Final Submission 2 copies binding comb report - Supervisor
- Coordinator
1 softcopy report – word/pdf files (burn in cd)
Format (eee368.wordpress.com)

22. Final Exhibition

23. Sample of poster

24. Sample of poster presentation

25. PCB LAB PCB session -weekdays (Sunday to Thursday)
- Office hour (8am pm)
- Wearing lab coat & shoes
-Proper attire ( no slippers & t-shirts without collar)
-limitation up to 8 students per session
- early in morning

26. Supplier for electronic parts & components
Elektronik ON 40, Jalan Tok Lam Kuala Terengganu Tel: Fax: 09 – (SuburTek) Kuala Terengganu Branch: Lot 18, Tingkat 2, Plaza Kuala Terengganu, Jalan Tok Lam, Kuala Terengganu, PIC: Mr. Ismail Mobile : Fax :

27. Internet reference www.rsmalaysia.com (M) (free shipping:component)
(component, sample project)
(M)(component)
(US)(robotic component)
(sample project,componet,etc)
(sample project)
(M)(component)
(US) (sensor, ic,etc)