1. On the Ground
Muon Ionisation Cooling Experiment ( MICE ) – pre-cursor to a neutrino factory

2. On the Ground
AFC Module for MICE – being produced with Oxford University for the MICE experiment
This is a superconducting magnet with a 20litre liquid hydrogen absorber in the centre

3. MICE Muon Ionisation Cooling Experiment – hydrogen system
Condenser
LH2 dummy absorber
Level
sensors
Cryocooler SRDK-415
1.5
35/45
Radiation shield
Hydrogen inlet and outlet
He inlet and outlet
Cu bottom plate
with heat exchanger
Mice has three 20litre liquid hydrogen absorbers at below 20K
We are providing the storage and delivery system
The R&D phase will use a test cryostat to store the hydrogen until required. The control and operation is quite complex

4. MICE Muon Ionisation Cooling Experiment – decay solenoid
Working on integration and refurbishment activities including the installation of the cryogenic plant and control system
Parameters:
Central field 5T
Open inner Radius 60mm
Coil inner Radius 65mm
Coil length 8m
Stored Energy 1.5MJ
Max. Current 1000A
Cu:NbTi ratio 3.5
Current density 220 Amm-2

5. Undulators Helical Undulators
Working on planar undulators for synchrotron sources

6. Undulators 4m long prototype in manufacture made in 2 x 2m sections
Helical CollaborationMaking Waves for Positrons ILC Newsletter October 2006