Presentation is loading. Please wait.

Presentation is loading. Please wait.

MBE Growth of Graded Structures for Polarized Electron Emitters

Similar presentations


Presentation on theme: "MBE Growth of Graded Structures for Polarized Electron Emitters"— Presentation transcript:

1 MBE Growth of Graded Structures for Polarized Electron Emitters
Aaron Moy SVT Associates, Eden Prairie, Minnesota in collaboration with SLAC Polarized Photocathode Research Collaboration (PPRC): T. Maruyama, F. Zhou and A. Brachmann Acknowledgements: US Dept. of Energy SBIR contract #DE-FG02-07ER86329 (Phase I) contract #DE-FG02-07ER86330 (Phase I and II)

2 Outline Introduction to Molecular Beam Epitaxy GaAsP Photocathode
AlGaAsSb Photocathode AlGaAs/GaAs Internal Gradient Photocathode Conclusion

3 Epitaxy Growth of thin film crystalline material where crystallinity
is preserved, “single crystal” Atomic Flux Bare (100) III-V surface, such as GaAs Deposition of crystal source material (e.g. Ga, As atoms)

4 Result: Newly grown thin film, lattice structure maintained
Starting surface

5 Molecular Beam Epitaxy (MBE)
Growth in high vacuum chamber Ultimate vacuum < torr Pressure during growth < 10-6 torr Elemental source material High purity Ga, In, Al, As, P, Sb ( %) Sources individually evaporated in high temperature cells In situ monitoring, calibration Probing of surface structure during growth Real time feedback of growth rate

6 Molecular Beam Epitaxy
Growth Apparatus:

7 MBE- In Situ Surface Analysis
Reflection High Energy Electron Diffraction (RHEED) High energy (5-10 keV) electron beam Shallow angle of incidence Beam reconstruction on phosphor screen RHEED image of GaAs (100) surface

8 H-Plasma Assisted Oxide Removal
External view of ignited H-Plasma RHEED image of oxide removal from GaAs Substrate Regular oxide removal with GaAs occurs at ~ 580 °C With H-plasma, clean surface observed at only 460 °C

9 MBE System Photo

10 MBE- Summary Ultra high vacuum, high purity layers
No chemical byproducts created at growth surface High lateral uniformity (< 1% deviation) Growth rates micron/hr High control of composition and thickness Lower growth temperatures than MOCVD In situ monitoring and feedback Mature production technology

11 MBE Grown GaN Photocathodes
Unpolarized emission Very efficient, robust Can be grown on SiC

12 MBE Grown GaAsP SL greater than 1% QE achieved 86% polarization
material specific spin depolarization mechanism US Dept. of Energy SBIR Phase I and II contract #DE-FG02-01ER83332

13 Antimony-based SLs for Polarized Electron Emitters
Develop structure based on AlGaAsSb/GaAs material Sb has 3 orders lower diffusivity than Ga Sb has higher spin orbit coupling than As

14 Antimony-based SLs for Polarized Electron Emitters
X-ray Low QE measured for test samples (< 0.2%) Confinement energy too high --> electrons trapped in quantum wells Band Alignment

15 Internal Gradient SLs for Polarized Electron Emitters
Photocathode active layers with internal accelerating field Internal field enhances electron emission for higher QE Less transport time also reduces depolarization mechanisms Gradient created by varied alloy composition or dopant profile

16 Internal Gradient SLs for Polarized Electron Emitters
With accelerating field No accelerating field Order of magnitude decrease in transport time Increased current density Projected increase of 5-10% in polarization

17 Internal Gradient GaAs/AlGaAs SLs for Polarized Electron Emitters
35% to 15% Aluminum grade Non-graded control

18 Internal Gradient GaAs/AlGaAs SLs for Polarized Electron Emitters
X-ray Characterization Simulation Measured Data

19 Internal Gradient GaAs/AlGaAs SLs
Polarization decreased as aluminum gradient increased Due to less low LH-HH splitting at low aluminum % QE increased 25% due to internal gradient field Peak polarization of 70 % at 740 nm, shorter than nm of GaAs

20 SBIR Phase II Internal Gradient SLs
Next Steps: Further graded AlGaAs/GaAs photocathodes Linear grading versus step grading Doping gradient Vary the doping level throughout the active region to generate the accelerating field Doping gradient applied to GaAsP SL structure

21 Conclusion Applying capabilities of MBE to polarized photocathode emitters AlGaAsSb photocathodes SBIR Phase II for internal gradient photocathodes Increase current extraction Increase polarization


Download ppt "MBE Growth of Graded Structures for Polarized Electron Emitters"

Similar presentations


Ads by Google