1. Masonry Tools and Equipment
Module

2. Identify and name the tools used in performing masonry work.
Transparency 1
Objectives
Upon completion of this module, the trainee will be able to do the following:
Identify and name the tools used in performing masonry work.
Identify and name the equipment used in performing masonry work.
Describe how each tool is used.
Describe how the equipment is used.
Associate trade terms with the appropriate tools and equipment.
Demonstrate the correct procedures for assembling and disassembling scaffolding according to federal safety regulations, under the supervision of a competent person.

3. Identify masonry hand and power tools.
Transparency 2
Performance Tasks
Under the supervision of the instructor, the trainee should be able to do the following:
Identify masonry hand and power tools.
2. Assemble and disassemble scaffolding under the supervision of a competent person, according to federal safety regulations.

4. Transparency 3
Figure 1 - Parts of a Trowel

5. Transparency 4
Figure 15 - Tooled Mortar Joints

6. Transparency 5
Figure 23 - An Air Bubble Shows Level or Plumb

7. Transparency 6
Figure 25 - Spacing Rules

8. Transparency 7
Figure 35 - Plumb Bob

9. Transparency 8
Figure 40 - Water Bucket and Barrel

10. Transparency 9
Figure 49 - Components of a Powder-Actuated Driver

11. Transparency 10
Figure 57 - Materials, or Brick, Hoist

12. Transparency 11
Figure 58 - Tower Crane

13. Transparency 12
Figure 62 - Conveyor

14. Transparency 13
Figure 63 - Scaffold Frame Types

15. Transparency 14
Figure 64 - Connecting Scaffold Sections

16. Transparency 15
Figure 65 - Hook-Mounted Scaffold Plank

17. Transparency 16
Figure 66 - Completed Tubular Steel Scaffolding

18. Transparency 17
Figure 67 - Putlog at Base of Scaffold