1. Wireless Relay
HDL-MPR01-RF.18

2. Description
HDL-MPR01-RF.18 Wireless Relay, has 4CH dry contact, can control target by switch. This module should be configured by wireless gateway.

3. Connection
1. Press the ‘PROG’ button 3 times continuously within 3s in the Wireless Gateway, the LED of the Wireless Gateway will flash quickly in red, indicating it is ready to broadcast its Wireless parameters (Frequency & Password) to the Wireless Dimmer.
2. Programming button: if it is working fine, the green light will flicker, press the button three times continuously within 3s, and then the LED will flash quickly.
3. The LED of Wireless Relay will be off automatically, and then, press ‘PROG’ button of Wireless Gateway again.

4. Channel Name: Do the Remark for easy management.
Open delay: When receives the on command, will not switch on immediately but after the delay time.
Close delay: When receives the off command, will not switch off immediately but after the delay time.
Protect delay: If a protection delay of 1 minute is set, and the relay channel is turned off, it cannot be turned on again until 1 minute later. This is useful for loads which are not suitable to be rapidly turned on and off.
5/28/2018

5. Configuration Device ID Control type Channel and level
You can use the panel to control the wireless relay channel.

6. Dry Contact
The Wireless Dimmer has 4 channels dry contact.

7. Dry Contact Switch type:
Two different Switch types - Momentary and Toggle
a) Momentary Switch - When pressed, it is on, when released, it is off.
Generally select ‘signal on; signal on/off; combination on/off; etc..’
b) Toggle Switch – It is bi-stable switch, you can set it on or off.
Generally select “Mechanic switch” mode for this kind of switch. a) b)

8. Dry Contact Setting: Set the dimming mode for each channel. Dimming:
Set the dimming value for each channel:
5/28/2018

9. Dry Contact Setting for keys:
Enable/disable: enable/disable the input channels.
Enable lock: If be selected, can use panel to lock/unlock this channel. .
5/28/2018

10. Dry Contact
Target:
Can set each channel’s targets.
5/28/2018