1. Drafting I Unit 4 Section 3
Apply procedures for manipulating objects (Section 4 layers), (Section 5 modifying),
(Section 6 templates, viewports).

2. 1. The following are properties of an object:_______________
Layer
Color
Linetype

3. 2. If you draw a rectangle a width of 5" and a height of 10", what would the area be?_____________________
50 sq. inches

4. 3. In a Template file, the user can select ______________ as the units.
Architectural
Engineering
Decimal

5. 4. When you __________ a layer, you can avoid changing entities on that LAYER, while still being able to see the layer.
Lock

6. 5. To avoid having others change entities on a specific LAYER:_______________
Lock the layer.

7. 6. The _____________ command provides the length of an object but does not place a dimension line on the drawing.
Distance

8. 7. Layers control__________________ of objects in the drawing.
Linetype
Color
Visibility of objects

9. 8. The bigger the linetype scale, ______
The less repetitions appear on a hidden line

10. 9. To EXTRUDE a profile:_________________
Take a 2D shape and give it thickness.

11. 10. Which CAD command enlarges or reduces selected objects proportionally in the X, Y, and Z directions from a base point? _______________?
Scale

12. 11. To create a duplicate, opposite shape, use the _____________ command.
Mirror

13. 12.The_______command needs a boundary line, arc, or circle to connect to.
Extend

14. 13. The best way to create a parallel copy of geometry in your drawing would be using the _____________ command?
Offset

15. 14. Which CAD command creates multiple copies of objects in a circular or rectangular pattern?
Array

16. 15. Moving an object "0, 0, -4" would move it four units in which direction?_______________
Negative z

17. 16. The ___________ command is used to round off corners.
Fillet

18. 17. The command that allows lines to be lengthened to a specified line or object on a CAD drawing is:_______________
Extend.

19. 18. The __________________command allows you to alter the shape of an object, by making it wider or shorter proportionally.
Stretch

20. 19.The________________co mmand applies an angled corner to two intersecting lines.
Chamfer

21. 20.You would use the _____________command to combine multiple objects, like lines/arcs into one.
Join

22. 21. Which command breaks a line into two or more independent lines

23. 22. The command that allows lines to be lengthened to a specified line or object is the ___________ command.
Extend.

24. 23.In CAD, a ____________ file includes specific units and settings to use to start new drawings by saving the file with a _____________ extension.
Template/ .dwt