1. Multi-Purpose Auditorium Sound Reinforcement System Design ECE 40020  Spring 2017
Paste a photo of team here, annotated with names of team members.

2. Outline Primary System Design Constraints Venue Illustration
Loudspeaker Selection, Placement, and Rigging
EASE Simulation Results
Power Amplifier/Signal Processing Requirements and Selection
Mixing Console Requirements and Selection
Microphone Requirements and Selection
Signal Path Wiring Diagram
Major Component List and Street Price Estimate
Summary and Recommendations

3. Primary System Design Constraints
Generic fan-shaped auditorium with seating for 6000 (approx main floor, st balcony, 750 2nd balcony)
Minimum SPL of 105 dB at back row of (main floor) seating
No more than 5 dB variation in SPL over the entire seating space for the 500 Hz, 1 KHz, 2 KHz, 4 KHz, and 8 KHz frequency bands
Frequency response of 40 – 16,000 Hz  5 dB
%ALCONS no greater than 10% over entire seating space
Minimum 48-channel mixing console
Minimum of 4 separate monitor mixes (and corresponding monitor loudspeaker systems)
Support for 20 compatible wireless microphone channels
Good assortment of general-purpose wired and wireless microphone systems
Digital media recording/playback capability
All equipment mounted in rack cabinet(s)
Budget of $500,000

4. Venue Illustration

5. System Design Constraints
Outline of how primary design constraints guided the overall system configuration and component selection

6. Loudspeaker Selection, Placement, and Rigging
Loudspeaker selection criteria, alternatives considered
Illustrations of mounting locations, aiming, rigging

7. EASE Simulation Results

8. Power Amplifier/Signal Processing Requirements and Selection
Loudspeaker sensitivity specifications and electrical watts calculation
Power amplifier selection rationale and alternatives considered
Signal processing requirements and component selection rationale

9. Mixing Console Requirements and Selection
Mixing console selection rationale and alternatives considered

10. Microphone Requirements and Selection
Microphone selection rationale and alternatives considered

11. Signal Path Wiring Diagram

12. Major Component List and Street Price Cost Estimate

13. Summary and Recommendations
Summary of work completed
Results obtained from design and simulation
How extra funds would be utilized if available

14. Questions / Discussion