1. THE INDEXING MECHANISM OF GEAR HOBBING MACHINE

2. Group Members Waleed Munir 07-IME-14 Faizan Javed 07-IME-28
Shahbaz Malik IME-32
Ahsan Tahir IME-43
Osama Afzal IME-18

3. Gears A gear is a wheel with teeth along its rim.
It is used to transmit power from one shaft to another.

4. Production of Gears Broaching Hobbing Shaping Milling Lapping
Plastic Injection Molding
Powder Metal Sintering
Forging
Casting

5. GEAR HOBBING
Gear hobbing is a multipoint machining process in which gear teeth are progressively generated by a series of cuts with a cutting tool known as hob. Both the hob and the workpiece revolve constantly as the hob is fed across the face width of the gear blank.

6. Process Characteristics
Is a gear generating process that uses a hob cutter
Cutters and blanks rotate in a timed relationship
Maintains a proportional feed rate between the gear blank and the hob
Cuts several teeth on a progressive basis used for high production runs

7. Gear Production Parameters
Feed rate
Indexing head
Index and feed change gears establish the definite relationship for a specific gear.

8. Indexing The relationship between the rotation of the hob, the
rotation of the work , and the amount and direction of
feed that enables the gear to be cut.
Speed change gears can be changed without affecting the relationship between hob, work and feed.

9. Indexing Head
The cutter spindle mounted on swirling head is connected through toothed gearing of different combinations to the table upon which the blank is carried
For each revolution of the table and blank, the cutter makes a definite number of revolution in the same period of time.

10. Indexing Movements The movements of indexing head is controlled by
following to main components
Indexing Gearing
Feed Gearing

11. Indexing Gearing
The driving shaft and the table upon which the blank is mounted both fixed and change gear wheels are usually employed.
Generally for spur gears
No.of teeth in driving wheels No.of theads in cutter x Constant quantity. =
No.of teeth in drivenwheels No.of teeth to be cut in blank

12. Feed Gearing
Controls the feed of the cutter relatively to the blank,it is defined as the movement of the cutter with respect to the blank per revolution ot the blank and table,in direction parallel to axis of latter.
For spur gears
No.of teeth in driving wheels Feed per rev. of blank x No.of threads
in cutter =
No.of teeth in driven wheels No of teeth to be cut in blank x Const.

13. Relationship between index & feed
To maintain desired relationship between index and feed there are two constant, to decide correct change gears
Machine index constant
Machine feed constant

14. Machine Index Constant
The machine index constant is the number of revolutions of the hob spindle during one revolution of the work spindle
For spur gears
Index gear ratio = KT N
K= machine index constant
T= number of threads on hob
N= number of teeth on gear

15. Machine Feed Constant
The machine feed constant is the distance in inches which the hob slide will advance during one revolution of the work spindle when the ratio of the feed change gear is 1:1
Feed gear ratio = F M
F= feed in per revolution of the work
M= machine feed constant

16. INDEXING FIXTURE
The index fixture consists of an index head, also called a dividing head
Footstock which is similar to the tailstock of a lathe.
The index head and footstock attach to the worktable of the milling machine by T-slot bolts

18. Index Plate
The indexing plate is a round plate with a series of six or more circles of equally spaced holes.
The index pin on the crank can be inserted in any hole in any circle.
The interchangeable plates regularly furnished with most index heads, the spacing necessary for most gears, boltheads, milling cutters, splines, and so forth can be obtained.

19. Types of indexing Direct indexing Indirect indexing
Differential indexing

20. Direct Indexing
To perform this type of indexing,the worm shaft must be disengaged from the worm gear wheel.
Most direct indexing plate have 24 holes, all divisions of which 24 is a divisible (24, 12, 8, 6, 4, 3, 2) can be produced with this plates.
Indexing data = N T
N – No. of holes in Indexing Plate
T – No. of required divisions

21. Indirect Indexing
The indexing data or the number of turns of the crank for most division, it is necessary only to divide 40 by the number of divisions to be cut.
Indexing data =
N (number of required divisions)
Indexing plates which are available:
Plate , 30, 33, 36, 39, 51, 57, 63
Plate , 24, 27, 29, 37, 43, 49, 59
Plate , 25, 28, 31, 41, 47, 53, 61

22. Differential Indexing
Sometimes, a number of divisions is required which cannot be obtained by simple indexing with the index plates regularly supplied.
To obtain these divisions, a differential index head is used. The index crank is connected to the wormshaft by a train of gears instead of a direct coupling as with simple indexing.

23. Indexing In Degrees
Workpieces can be indexed in degrees as well as fractions of a turn with the usual index head.
There are 360 degrees in a complete circle and one turn of the index crank revolves the spindle 1/40 or 9 degrees.
Therefore, 1/9 turn of the crank rotates the spindle 1 degree. Workpieces can therefore be indexed in degrees by using a circle of holes divisible by 9.

24. Hob work rotation relationship
Spur gears
For spur gears with a single thread hob,the blank moves one tooth space while the hob rotates once the rotation is timed by means of change gears

25. Helical gears
For helical gears,the rotaion of the work is silightly retarted or advanced in relationship to the rotation of the hob,and the feed is also held in a definite relationship with the work and the hob

26. Application Application in Gear Hobbing Machine
The two shafts (Hob spindle and work piece spindle) are rotated at a proportional ratio
This determines the number of teeth on the blank; for example, if the gear ratio is 40:1 the hob rotates 40 times to each turn of the blank, which produces 40 teeth in the blank.

27. Thank You