1. Beam diagnostics from GSI
O. Chorniy
on behalf of GSI LOBI

2. GSI LOBI participation in CR BD
On GSI responsibility:
Cryogenic Current Comparator project
DAQ for first turn diagnostics (Screens, SEM)
DAQ for current measurements (FCT, CCC, DCT, BLM)
GSI supports the In-Kind partners on the following components:
Specifications Schottky and BTF for ITEP Russia
Coordination of the BPM DAQ for Technodrom, Slovenia
Present status
Component
In-Kind
Specs status
Cryogenic Current Comparator
GSI 
to be done
Tune BTF Exciter
ITEP /GSI
Schottky Pick Up
approval
RGM
BINP
Scrapers
BINP 
BLM
Detector NN
HV supply and DAQ
Slovenia/GSI
done
DC Transformer and FCT
Detector + Vacuum Chamber
DAQ
Scintillation Screen and SEM-Grid
Pressurized air drive and control
Beam Stopper
BPM
Detector (sensor+pre-amplifier)+Vacuum Chamber

3. DAQ Developments for CR (and FAIR)
SCREENS
SEM
BPM and TUNE
BLM, DCT
FCT

4. Scint. screens diagnostics DAQ

5. Scint. screens diagnostics DAQ
CUPID (Control Unit for Profile and Image Data).
GUI screenshot during one of the measurements
FESA class with input fields from GUI
Comissioning this year
during beam time at GSI

6. Scint. screens diagnostics DAQ
PLC to control iris: main controller,
communication module and switch for satellite connection
Camera controller and power source
Industrial PC with FESA class running
Hardware installation of the PLC system containing two sets of:
PLC satellite controller, relay module, DAC modules.
Comissioning this year
during beam time at GSI

7. SEM diagnostics DAQ as an option for CR
Scheme of SEM grid DAQ and electronics
POLAND –PrOfiLe AcquisitioN Digitizer
FESA GUI to control the front-end electronics
Last beam time:
Test of QFW sensitivity limit. Preliminary,
direct comparison with theory predictions
shows good agreement for detection threshold.
Next, to estimate the aplicability of the systems for CR beam condition.

8. Pneumatic drives control
PLC Controller
PLC Satellite
Six-fold node
PA Terminal
IEPLC framework (CERN) to generate
FESA classes and scripts for PLC
Control system for pneumatic drives
Concept of the drives control is under evaluation.

9. BLM and DC measurements DAQ
Scheme of BLM system
Large Analog Signal and Scaling Information Environment
simplifies the observation of the time correlated information.
Different presentation tools in GUI
Actively used for
machine experiments
this year at GSI.
Example VME crate with SIS3820
multi-scaler boards.

10. Developments for BLM detector
Scheme of BLM system
Evaluation of the electronics
Rate limitations were investigated with:
Laser,
U, Au and p beams
Preliminary result:
Hamamatsu H6427, with a GSI active divider, has the largest gain variation and the best performance at high rates.
Measurements with BLM (Scint.type)
Response to Au beam at 300 AMeV, 3x107 pps

11. FCT DAQ Scheme for the FCT DAQ
Single board solution for multi-event triggering
FCT detector
SIS timing
time gate
generator
converter
digitized
RF signal
comparator
rate divider
trigger pulses
ADC
trigger
single trigger PC
Demo GUI with longitudinal
phase space tomography
VME crate with ADC
under development

12. DAQ for tune measurements
Base Band Tune Measurement System (BBQ)
VME with ADC in Electronic Room
GUI directly shows the tune
GUI and the FESA class for BBQ
measurements are under development

13. Organisational topics
Specifications for In-Kind partners
Schottky (waiting on decision on the type)
BTF (started, based on the SIS 18)
Specifications for GSI, complete systems:
CCC (After prototype tests in Cryring or HTP ?)
To clarify soon:
Scheme of mechanical part for “pneumatic drive” for First Turn Diagnostics .
The role of the BINP in Specifications approval procedure (discussed in October)
Review the applications of detectors (for example, clear commissioning scenario)
Component
In-Kind
Specs status
Cryogenic Current Comparator
GSI 
to be done
Tune BTF Exciter
ITEP /GSI
Schottky Pick Up
approval
RGM
BINP
Scrapers
BINP 
BLM
Detector NN
HV supply and DAQ
Slovenia/GSI
done
DC Transformer and FCT
Detector + Vacuum Chamber
DAQ
Scintillation Screen and SEM-Grid
Pressurized air drive and control
Beam Stopper
BPM
Detector (sensor+pre-amplifier)+Vacuum Chamber
The Contract
is signed!

14. Temp

15. „Test stand“ for tomography
Real BPM data loaded to signal generator
Oscii for control purposes
GUI
VME