1. TGaq Transaction Protocol
July 2013
doc.: IEEE /0788r1
November 2013
TGaq Transaction Protocol
Date:
Authors:
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

2. Transaction Protocol for TGaq
July 2013
doc.: IEEE /0788r1
November 2013
Abstract
Transaction Protocol for TGaq
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

3. Background TGaq develops simple MAC protocol
July 2013
doc.: IEEE /0788r1
November 2013
Background
TGaq develops simple MAC protocol
Defines over-the-air messages only (PAM)
Meets low level requirements of use cases
Other Fora deal with higher layers (L2+)
Liaison to other fora of our use cases
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

4. Transaction Protocol Part of the PAM (Pre-Association Messages)
July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
Part of the PAM (Pre-Association Messages)
The TP is implemented as an advertisement protocol enabling it to be carried, over the IEEE air interface, by the existing GAS mechanism.
Use a new advertisement protocol id “STP” – service transaction protocol (e.g. like RLQP)
New bit in AP extended capability IE
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

5. Transaction Protocol STP is different from ANQP
July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
STP is different from ANQP
Not a request/response mechanism
Allows unsolicited push messages from the STA
Messages can carry information from non-AP STA to AP
ANQP is a network oriented protocol. STP is not for network discovery. Separate rules are needed.
STP can use broadcast.
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

6. November 2013 July 2013 doc.: IEEE 802.11-13/0788r1
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

7. November 2013 July 2013 doc.: IEEE 802.11-13/0788r1
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

8. July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
A service discovery ULP within the mobile device wishes to send a message A to the LAN or external network (e.g. to discover a service).
Mobile device may need to discover BSS architecture
Send STP to AP, or to a proxy?
An STP Encapsulation message carries the ULP message A to the TXP. In turn the TXP passes the message to the co-located service discovery ULP. As the STP element type is STP Encapsulation the TXP recognises that no analysis is required. It merely forwards the message to the higher layer.
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

9. July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
STP operates between the ULP entities within itself and that of the Service Transaction Proxy (TXP).
The ULP is not tunnelled, as this may require a proxy for multicast DNS.
More detail required.
Thoughts on possible Push mode:
Push mode could be troublesome during the discovery/scanning phase
Need some state on STA to do push mode (potentially after Authentication or potentially during Association sequence)
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

10. November 2013 July 2013 doc.: IEEE 802.11-13/0788r1
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

11. Transaction Protocol ULP does not need to be standardised within Tgaq
July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
ULP does not need to be standardised within Tgaq
deliberately hide the details of the ULP so that we can focus on MAC design
When the higher layer ULP responds with another message B, the TXP uses another STP Encapsulation message to transmit message B back to the mobile device including the STP token. If an error occurs in the TXP transaction a Return Code may be alternatively returned to the mobile.
When the STP Encapsulation message is received by the mobile terminal the contents are passed back to the service discovery ULP.
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

12. July 2013
doc.: IEEE /0788r1
November 2013
Transaction Protocol
The message sequence is bi-directional and can be initiated by the ULP co-located with the TXP. Additionally STP does not need to “answer” Message A with a Message B, as it has no knowledge of how the ULP operates.
May require some IDs of ULP protocols and associate it with the encapsulation.
Possibly need to fragment large ULP frames.
Could just use GAS fragmentation
Possibly use a hash of a large ULP frame. (see r0)
Messages could be signed to provide some level of data integrity.
Need to do some additional work on defining the ULP ID space and its management
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

13. Service Transaction Protocol Proxy
November 2013
Service Transaction Protocol Proxy
Access Network
STA AP
Service Transaction Proxy
Service Protocol Specific Communication
Service Transaction Proxy
P802.11aq Signaling
MAC
MAC
Michael Montemurro, BlackBerry

14. Possible IE November 2013 July 2013 doc.: IEEE 802.11-13/0788r1 IDID
Length
Token ID
ULP ID
ULP payload
Signature Length
(optional)
Signature (optional)
Octets: 2 1
variable
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry

15. July 2013
doc.: IEEE /0788r1
November 2013
Data Integrity
Signature may be useful for data integrity, not security.
Michael Montemurro, BlackBerry
Stephen McCann, Blackberry