1. Hundreds of network cables
Multiple Network Cables: Corrosive at Dangerous areas, Difficult to Be Routed, and High Costs in Remote Areas
Network equipment room
Network cables are eroded because of high temperature and wasted gas.
Cables are eroded. The monitoring channels are blocked. As a result, the monitoring is unavailable.
Monitoring center
Hundreds of network cables
Cables are eroded. The monitoring channels are blocked.
In dangerous areas, cables are unreachable. As a result, it is difficult to monitor the environment.
In high-temperature and poisonous areas, cables cannot be deployed. As a result, it is difficult to monitor the environment.
In high-temperature and poisonous areas, cables cannot be deployed.
Waste gas detection
Cable routing costs are high at remote areas.
In remote areas, cables must be several kilometers long. These cables are difficult to be routed and the engineering costs are high.
Dangerous area
Cables must be several kilometers long, and the cable routing costs are high.
Remote area

2. LTE Internet of Things for Manufacturing Environment Monitoring: Real-time Environment Monitoring Without Using Cables
Collection layer
Gateway of the Internet of Things
Solution characteristics
Transport layer
Application layer
The coverage radius of a single eNodeB is 30 km, ensuring seamless coverage of remote monitoring points and dangerous environment.
An eNodeB supports a maximum of 5400 concurrent service requests.
Dedicated frequency 1.8 GHz is used, which has strong interference resistance capability.
Rich terminal deployment modes increase the ROI. The deployment modes include RTU+CPE or the Mini PCIe embedded with the RTU.
Monitoring center
30 km
RS232
CPE
RTU
Environment monitoring
Power consumption monitoring
Remote decision
Intelligent analysis
Polluted water detection
DBS3900
Equipment room
Mini PCIe
RS232 +
Waste gas detection
Pollutant discharge area
eCNS600
Data Center
RS232
CPE
RTU
Coal gas detection
DBS3900
Energy medium management area
Environment monitoring system
Energy management system

3. Multiple Dangerous Areas and Equipment Materials; Difficult to Position Personnel Location, Monitor and Manage Equipment
Dangerous areas have characteristics such as high temperature, high pressure, and proneness to combustion and explosion.
If a person enters a highly hazardous area mistakenly, warnings cannot be sent to the person, which results in casualties and deaths.
There are a lot of dangerous areas. When a person enters a dangerous area mistakenly, warnings cannot be sent to the person.
Persons enter dangerous areas mistakenly, and no warning is sent.
Dangerous areas
Spare parts warehouse
Move spare parts out the warehouse.
Spare parts transportation
Assembly
workshop
Parts reach the destination.
More than 2000 kinds of spare parts and the spare parts needs to be scanned manually. The workload is heavy.
More than 2000 materials need to be scanned manually for thousands of times every day. The workload is heavy.
A large number of materials require manual scanning when they are in or out of the warehouse. The workload is heavy.

4. Material and Personnel Positioning and Real-time Information Push Using Wi-Fi
Production factory
Production equipment room
Production monitoring center
Solution characteristics
Wi-Fi-based positioning and specific information push
UE, tag, or RFID wireless signals are collected by the AP and aggregated by the AC. The RTLS calculates the longitude and latitude (with a precision of 3 to 5 m) and sends the information to the production monitoring center to provide the following functions:
Route guidance
Material tracing
Campus navigation
Sending warning notifications in dangerous areas
Real-time specific information push
Spare parts warehouse
Providing location-based services: navigation, information push, and alarm association
RTLS AP
information push platform
Wi-Fi signal
Application server
Providing location monitoring, information push, and warning notifications in dangerous areas
Assembling area AC
 Location information collection flow
RFID signal read and write AP
 Location service pushing flow
Location information, such as whether spare parts reach the destination.
 Information push enabling or disabling flow
Wi-Fi-based positioning + specific information push flow

5. Invisible Cluster Dispatch; Site Conditions Fail to Pass Back Promptly？
Customers Pains
“Please help me locate whether the cable connection is correct: Left or right……..
Invisible cluster dispatch(for traditional Clusters )
It is difficult for site complex conditions to describle clearly with phonetic
Site Conditions fail to pass back promptly(for operator networks)
Time delay is too long, communication is rather time- consuming,even communication interrupt
Site phonetic description
Remote expert
Site Conditions
“Please let us know the situation”
Waiting……
“What……”
(Voice prompts )“This call has ended！”
Dispatch center
Site engineer
Time delay is too long. Communication interrupts.

6. Highlights and Deployment Network equipment room
Command and Dispatch During Production-Intelligent Multimedia Cluster Communication
Highlights and Deployment
Factory area
Handheld cluster communication terminal
Video monitoring server
Professional cluster communication, multi- party intercom, and command and dispatch at emergencies.
Sharing of multimedia data such as photos and video streams which enables users to visually know site conditions(traditional cluster communication supports only voice services).
Deployment of LTE networks in the factory area，deployment of video monitoring server and cluster server in the dispatching center; implementation of the eLTE cluster communication function in dispatch terminal.
Network equipment room
Handheld cluster communication terminal
DBS3900
Cluster server
Vehicle-mounted terminal
eCNS600
Dispatch terminal
Professional voice cluster dispatch
Handheld cluster communication terminal
DBS3900
Dispatching center
Real-time Multimedia Transmission
Alarming for Staff Member Fall-down
Remote Activation and Deactivation
Remote activation
Remote deactivation
Terminal drops to the ground.
Lost
Recovered
Staff member falls down.

7. Factory Wireless Network Solution: Wide LTE Coverage and Wi-Fi Coverage for Hot Spots
Solution features
LTE: Used for remote video monitoring, multimedia cluster, mobile scheduling, and manufacturing environment monitoring.
Wi-Fi: Used for mobile office, personnel positioning, and information push. Outdoor APs access the network using the LTE.
Wide network coverage: The coverage radius of the LTE reaches 100 km.
High bandwidth: The peak rate is 100 Mbit/s in the downlink and 50 Mbit/s in the uplink. The throughput is greater than 60 Mbit/s in high speed scenarios.
Easy to be deployed: Small-size EPC eCNS600 and distributed base station DBS3900 are small in size and light in weight, and therefore easy to be deployed.
Data Center ……
Network
Production area HQ
Logistics
Campus network
Environment monitoring and energy medium
DBS3900
eCNS600
Material and warehouse monitoring
OutdoorAP
Indoor AP
offices
Fixed inspection of equipment&
warehouse shelves
Remote equipment fault diagnosis
Personnel positioning
BYOD