Download presentation
Presentation is loading. Please wait.
1
Jeopardy Auxiliary Section Annotation Other $100 $100 $100 $100 $100
Orthographic Auxiliary Section Annotation Other $100 $100 $100 $100 $100 $200 $200 $200 $200 $200 $300 $300 $300 $300 $300 $400 $400 $400 $400 $400 $500 $500 $500 $500 $500 Final Jeopardy
2
$100 Question from Orthographic
Projected views can only be created from existing base views. True or False
3
$100 Answer from Orthographic
True
4
$200 Question from Orthographic
The first view you create in a 2D drawing is the a. feature view. c. model view. b. base view. d. paper view.
5
$200 Answer from Orthographic
b. base view
6
$300 Question from Orthographic
The type of projection used in most U.S. ANSI-based drawings is ____________________-angle projection
7
$300 Answer from Orthographic
third
8
$400 Question from Orthographic
Drawings that contain more than one view of a model are known as ____________________ drawings.
9
$400 Answer from Orthographic
multiview
10
$500 Question from Orthographic
An isometric view can only be projected from a base view. True or False
11
$500 Answer from Orthographic
False
12
$100 Question from Auxiliary
An auxiliary view can be created using the Isometric View command. True of False
13
$100 Answer from Auxiliary
False
14
$200 Question from Auxiliary
An auxiliary view must be based on an orthographic projection that is aligned to the base view. True or False
15
$200 Answer from Auxiliary
True
16
$300 Question from Auxiliary
Auxiliary views typically show internal features of a part that have been cut. True or False
17
$300 Answer from Auxiliary
False
18
$400 Question from Auxiliary
When orthographic views cannot describe a model’s true shape and size, one or more ____________________ views may be needed.
19
$400 Answer from Auxiliary
20
$500 Question from Auxiliary
There can only be one base view per sheet. True of False
21
$500 Answer from Auxiliary
false
22
$100 Question from Section
A view that shows part of an object cut away to show the inside is known as a(n) ____________________ view.
23
$100 Answer from Section section
24
$200 Question from Section
The ____________________ line shows the path a section takes through an object. (hyphenated)
25
$200 Answer from Section Cutting-plane
26
$300 Question from Section
The first section view in a set of drawings is labeled 1-1; the second section view is labeled 2-2. True or False
27
$300 Answer from Section false
28
$400 Question from Section
The command that allows you to create rectangular and polar arrays is the ____________________ command.
29
$400 Answer from Section pattern
30
$500 Question from Section
A(n) ____________________ note is a note that pertains to the entire drawing.
31
$500 Answer from Section general
32
$100 Question from Annotation
Center marks and centerlines are created in Inventor’s drawing mode. True or False
33
$100 Answer from Annotation
True
34
$200 Question from Annotation
A group of settings used to display dimensions uniformly in a 2D drawing is known as a dimension a. style. c. specification. b. group. d. template.
35
$200 Answer from Annotation
a. style
36
$300 Question from Annotation
To make a dimension line up with an angled line on a drawing view, right-click the dimension, select Dimension Type, and then select ____________________.
37
$300 Answer from Annotation
aligned
38
$400 Question from Annotation
To make views appear smaller on the drawing sheet without affecting their actual size, you should adjust the ____________________. (two words)
39
$400 Answer from Annotation
View scale
40
$500 Question from Annotation
To show the feature dimensions on a drawing, right-click a view and select the ____________________ Dimensions command.
41
$500 Answer from Annotation
retrieve
42
$100 Question from Other The drawing sheet templates in the Drawing Resources folder are set up specifically for various standards and sheet sizes. True or False
43
$100 Answer from Other True
44
$200 Question from Other By default, if a view will fit on the selected paper size at full scale, Inventor® places it on the drawing sheet at a scale of a. 2:1. c. 1:1. b. 2:3. d. 1:2.
45
$200 Answer from Other c. 1:1.
46
$300 Question from Other A tool that communicates engineering ideas and designs to manufacturing, purchasing, and other departments is the ____________________ drawing.
47
$300 Answer from Other engineering
48
$400 Question from Other Manufacturing machines that are controlled by computer programs are known as computer ____________________ machines. (two words)
49
$400 Answer from Other numerical control
50
$500 Question from Other ____________________ features are symmetrical about an axis of symmetry.
51
$500 Answer from Other Revolved or Mirrored
52
Final Jeopardy What is the process of creating physical
prototypes from solid models know as?
53
Final Jeopardy Answer Rapid prototyping
Similar presentations
