Presentation is loading. Please wait.

Presentation is loading. Please wait.

Types of Models Marti Blad PhD PE

Similar presentations


Presentation on theme: "Types of Models Marti Blad PhD PE"— Presentation transcript:

1 Types of Models Marti Blad PhD PE
Handouts/supplemental stuff for workshop: Air pollution Dispersion Models; List of different models from epa’s scram site Marti Blad PhD PE

2 EPA Definitions Dispersion Models: Estimate pollutants at ground level receptors Photochemical Models: Estimate regional air quality, predicts chemical reactions Receptor Models: Estimate contribution of multiple sources to receptor location based on multiple measurements at receptor Screening Models: applied 1st , determines if further modeling needed Refined Models: req’d for SIP, NSR, and PSD Regulatory requirement for permits

3 Models = Representations or pictures
Numerical algorithms Sets of equations need inputs Describe = quantify movement Simplified representation of complex system Box or Mass Balance Used to study & understand the complex Physical, chemical, and spatial, interactions

4 Types of Models Gaussian Plume Statistical & Stochastic Empirical
Analytical approximation of dispersion more later Statistical & Stochastic Based on probability Recall regression is linear model Empirical Based on experimental or field data Actual numbers Physical (scale models) Flow visualization in wind tunnels, etc. Understanding which model will help to understand its limitations. What is the model based on.

5 Recall bell shaped curve
Plume dispersion in lateral & horizontal planes characterized by a Gaussian distribution Normal Distribution Mu is median Sigma is spread

6 Gaussian-Based Dispersion Models
Pollutant concentrations are calculated estimations at receptor Uncertainty of input data values Data quality, completeness Steady state assumption No change in source emissions over time Screen3 will be end of the week

7 Gaussian Dispersion C(x,y,z) Downwind at (x,y,z) ? z ¤ Dh = plume rise
h = stack height Dh H = effective stack height H = h + Dh H h x C(x,y,z) Downwind at (x,y,z) ? y

8 Air Pollution Dispersion (cont.)
This assumption allows us to calculate concentrations downwind of source using this equation where      c(x,y,z) = contaminant concentration at the specified coordinate [ML-3],       x = downwind distance [L],       y = crosswind distance [L],       z = vertical distance above ground [L],       Q = contaminant emission rate [MT-1],       sy = lateral dispersion coefficient function [L],       sz = vertical dispersion coefficient function [L],       u = wind velocity in downwind direction [L T-1],       H = effective stack height [L]. 

9 Gaussian model picture
Predicted concentration map

10 The Gaussian Plume Model
The shape of the curve = Bell shaped = Gaussian curve hence the model is called by that name. Now, we come to why did I have to torture you with bell shaped curves and Z numbers, probability and predictions etc. Remember the computer will do calculations but think about how to mathematically describe the movement of pollutant molecules, dancing,

11 Ways to think about math
Gaussian = “normal” curve math Recall previous distribution picture Dispersion & diffusion dominates Eulerian Assumes uniform concentrations in box Assumes rapid vertical and horizontal mixing Plume in a grid Predicts species concentrations Multi day scenarios

12 Eulerian Air Quality Models
Grid type models Model simulates the species concentrations in an array of fixed computational cells (Zion) AKA Plume in Grid Figure from

13 Box idea: 1-D and 2-D Models

14 Dimensional Concept Variable is Time: t
Variable is Time and height: t, y Variable is Time, height and length distance: t, x, y t, x, y, z

15 3-Dimensional Models Depth of boxes discussed under meteorology

16 Other choice: Lagrangian
“Puffs” of pollutants Trajectory models Follow the particle Puff W2 W1 S.S. Plume

17 Lagrangian Air Quality Models
From “INTERNATIONAL AIR QUALITY ADVISORY BOARD PRIORITIES REPORT, the HYSPLIT Model” (

18 Assumptions & limitations
Physical conditions: Topography Locations: buildings, source, community, receptor Appropriate for the averaging time period Statistics & math Meteorology Stack or source emission data Pollutant emission data Plume rise, Stack or source specific data Location of source and receptors

19 EPA MODELS—Screening

20 EPA MODELS—Regulatory
CALPUFF AERMOD

21 EPA Models—Other


Download ppt "Types of Models Marti Blad PhD PE"

Similar presentations


Ads by Google