1. Jordan Terry Eastern Kentucky University
Arcade machine
Jordan Terry
Eastern Kentucky University
For the final capstone presentation this slide will change to:
All Caps Title
Presenter’s Firstname Lastname
Affiliation (such as EKU, Dept. of Technology, NET program)

2. OUTLINE Motivation Introduction Assumptions Proposed Solution Parts
Results
Conclusion
Future Work
References
Overview of the presentation (5-7 phrases)
Presentation could have between slides

3. MOTIVATION Wanted to create a fun and interesting project.
Something that would challenge me.
Multiple slides may be used for motivating different aspects of the problem that is being solved through this technology or device
Show and Tell
Highlight need with interesting facts
Broadly speaking why is this issue important?
No more than 5-7 phrases on each slide

4. INTRODUCTION
Did not have much money to spend so wanted to keep it simple.
One player.
Wanted to play it off my TV.
Had to have Galaga and Mortal Kombat.
Background about issue
Any technical research you performed related to the topic (multiple slides may be used)
Perspectives of different sources about problem or issue
List essential theory needed for solving the problem or sub-problems

5. Assumptions Some games will not be compatible with my system.
I will be running everything off of a Windows OS (XP).
List the operating conditions or system constraints under which the problem is being solved
Any implicit or explicit assumptions about the product, the process, the ultimate users, the test conditions, intended vs. actual use

6. PROPOSED SOLUTION Design my box. Build it.
Install computer components.
Setup Buttons & Joystick.
Load software.
Configure software.
List steps taken to solve the problem such as but not limited to:
Brainstorming (gist of ideas tried)
Proposed solution with justification
Arranging for software/hardware
Assembly
Testing and troubleshooting
Verifying results
This might continue on multiple slides

7. Proposed solution Emulator – MAME32 Joy2key as my keyboard emulator.
Multiple Arcade Machine Emulator
One of the most popular ones.
Joy2key as my keyboard emulator.
Converts button inputs into keyboard inputs.

8. Parts UltraStik 360 joystick (1) Goldleaf buttons (8)
UltraStik Button / Encoder Harness
Old PC
Gateway e4300
4’ x 8’ sheet of finished wood

9. RESULTS
I was able to complete my project over the course of two weeks.
Joystick and buttons worked.
All the games loaded properly.
List key results
Include lots of relevant images and multimedia only (maybe 1 or 2 goofy images in the presentation are OK)
Show simulation plots or clip if available
Show calculated results if available

10. Results

11. results

12. results

13. results onboard 24 MHz microprocessor
USB 2.0 interface that presents itself to the operating system as a standard HID game pad. This means that you will not need an encoder for this joystick because it is built-in.

14. results

15. CONCLUSIONS Overall, my project functioned correctly.
Had a few problems
First motherboard went bad.
Installed joystick upside down. Had to remount.
Comment on significance of results – their applicability in the workplace
Comment on your individual learning about the capstone project planning, design, implementation, and testing process.

16. FUTURE WORK Add more games Setup a frontend
WahCade
Add controls for second player.
Discuss implications of work – positive and negative
Possible extensions to project
Invite audience for suggestions
Thank the audience
Provide your permanent contact
Include appropriate image or clip art

17. REFERENCES
Alex Caste, “How to build a kick-ass MAME arcade cabinet from an old PC”, 9/9/09, MaximumPC,
Mike Trello, “Barcade”, Arcadecab, ,
Todd Moore, “How to build your own Arcade System”, TMSOFT,
For the final capstone presentation, provide an APA reference to your PowerPoint as well as the project videos that will be produced for hosting through the EKU department of Applied Engineering & Technology --

18. Questions?