Presentation is loading. Please wait.

Presentation is loading. Please wait.

Onboard/In-Field Fault Detection and Diagnostics

Similar presentations


Presentation on theme: "Onboard/In-Field Fault Detection and Diagnostics"— Presentation transcript:

1 Onboard/In-Field Fault Detection and Diagnostics
a Subcommittee of the Advanced Technology Committee of the Western HVAC Performance Alliance℠ Subcommittee Meeting 9:30am – 12:30pm (PT) November 6, 2011 Call-in: 712/ # Weblink:

2 Agenda 9:30 Roll Call 9:35 Updates:
Title 24 SCE Testing Standard 207P DOE/CBEA CEE ENERGY STAR ASHRAE 90.1 10:00 Finalize Draft Roadmap: Evaluate Progress 10:30 Craig Fulghum: Virtjoule FDD Tool 11:15 Jim Braun and Michael Brandemuehl: Economizer Savings Estimator 12:00 Adjourn

3 Committee Members Annirudh Roy, AHRI Anthony Hernandez, SCE
AY Ahmed, Sempra Bob Cross, Xencom Brent Eubanks, Taylor Engineering Cathy Chappelle, HMG Chris Scruton, CEC Craig Fulghum, Virtjoule Dale Gustavson, BBI Dale Rossi, FDSI Daniel Sullivan, Target David Yuill, Purdue Dick Lord, Carrier Glenn Hourahan, ACCA Jerine Ahmed, SCE Jim Braun, Purdue Jon Douglas, Lennox KC Spivey, PG&E Klas Berglof, ClimaCheck Kristin Heinemeier, UC Davis Mark Cherniack, NBI Mark Hydeman, Taylor Engineering Matt Tyler, PECI Mike Brambley, PNNL Nathan Taylor, Sempra Sean Gouw, SCE Sherry Hu, PG&E Vance Payne, NIST Warren Lupson, AHRI

4

5 Updates Title 24 SCE Testing ASHRAE TC7.5 Standard DOE/CBEA CEE
ENERGY STAR ASHRAE 90.1/189

6 Updates to Title 24 See attached documents.

7 SCE Testing

8 ASHRAE Standard 207P Title: Purpose: Scope:
Laboratory Method of Test  of Fault Detection and Diagnostics Applied to Commercial Air-Cooled Packaged Systems Purpose:  This standard provides a method to define an FDD tool’s function. This standard also provides a method of laboratory test for the performance of Fault Detection and Diagnostic (FDD) tools on commercial air-cooled packaged equipment. Scope:      2.1 This standard applies to commercial air-cooled packaged air conditioning systems. 2.2 The test is a physical laboratory test on a particular combination of diagnostic tool for each model of a unitary system. 2.3 This standard applies to any on-board, after-market or hand-held hardware and/or software functionality that detects and/or diagnoses problems that lead to degraded performance such as, energy efficiency, capacity, increased maintenance costs or shortened equipment life. First Meeting January 23, 8am-12pm (CST), in Chicago

9 General Interest Producer User Amr Gado, Emerson x Dale Rossi, FDSI Daniel Sullivan, Target David Yuill, Purdue University Dick Lord, Carrier Glenn Remington, State of Michigan Jay Enck, CxGBS Joe Xiaohui, Iowa Energy Center Jon Douglas, Lennox Klas Berglof, ClimaCheck Kristin Heinemeier, UC Davis - WCEC Mike Brambley, PNNL Mikhail Gorbounov, UTC Paul Grinberg, Honeywell Reinhard Seidl, Taylor Engineering Robert Mowris, Verified Sean Gouw, SCE Vance Payne, NIST Vern Smith, Smith Energy Engineers

10 DOE/CBEA October 4, 2011 - 12:02pm Washington, D.C. –
“The U.S. Department of Energy (DOE) today announced that it has received the first official submission by a manufacturer to a voluntary challenge for a new generation of high-efficiency cost-effective air conditioners for commercial buildings. “The Department will begin testing the new Daikin McQuay “Rebel” unit from McQuay International to determine whether it meets the high energy-efficiency performance levels outlined by the challenge.

11 DOE Spec FDD Requirements
Original T24 Proposal Final T24 Proposal DOE Spec Sensor Failure Air Temp. Sensor Failure/Fault Sensor Failure/Fault (incl drift) High Refrigerant Charge - Low Refrigerant Charge Compressor short cycling Refrigerant Line Restrictions/TXV Problems Refrigerant Line Non-Condensables Low Side HX problem Low Evaporator Air Flow Dirty Filter High Side HX problem Efficiency Metric for Tracking or Comparison with No-fault Model Capacity Degradation Efficiency Degradation Economizer not Functional or Optimized Not Economizing When it Should Economizing When it Should Not Damper Not Modulating Excess Outdoor Air Low Ventilation

12 Roadmap

13 Roadmap

14 Roadmap

15 Evaluation of Committee Effectiveness
Accomplishments Revisions to Title 24 vetted, revised, completed Standard 207P proposed and launched Roadmap written Oversight of SCE Lab Testing Reached out to CEE and CBEA/DOE Kept tabs on EnergySTAR requirements Feedback? What else should we be doing? What should we not have done? Are meetings time well spent? Others we should invite?

16 Virtjoule FDD Tool

17 Economizer Savings Estimator

18 Adjourn Next Steps Review Action Items
Next Meeting in 6 weeks: Week of December 19

19 Thank you! Mark Cherniack markc@newbuildings.org
Kristin Heinemeier Jerine Ahmed Anthony Hernandez KC Spivey 19


Download ppt "Onboard/In-Field Fault Detection and Diagnostics"

Similar presentations


Ads by Google