1. DESIGN AND DEVELOPEMENT OF AIR CONDITIONING CUM WATER COOLER
submitted by
G.SIVA
G.HARI NAIK
N.ANIL KUMAR
T.ANIL KUMAR
G.KIRAN BABU

2. ABSTRACT
“Faster, mightier & smaller” is still the keyword for every invention and development. In day-to-day world we concentrate on the compactness and efficiency of every product. Keeping this in mind “Water Cooler Cum Air Conditioner” was fabricated. “Human comfort is that condition of mind, which expresses itself with the thermal environment”. In this project two rival properties of cool water and cool air are obtained. This system can be used continuously.

3. REFRIGERATION CYCLE VAPOUR COMPRESSION
The low pressure vapour in dry state is drawn from the evaporator during the suction stroke of the compressor.
During compression stroke the pressure and temperature increases until the vapour temperature is greater than the temperature of condenser cooling medium.

5. DESCRIPTION OF THE EQUIPMENT
Compressor
Condenser
Expansion Valve
Evaporator
Fan 
Water tank

6. FAN
It continuously moves the mass of air at a desired velocity by the action of its rotor.

7. COMPRESSOR
The compressor is the only moving part in the system and its functions is to raise the pressure of the vapour refrigerant coming form the evaporator, high enough so that the temperature of the leaving gas is higher than that of the condensing medium.
Hence, the same refrigerant can be liquefied back and expanded to the evaporator suction conditions in a cycle.

8. DIAGRAM

9. CONDENSER
The condenser is an important device, used in the high pressure side of a refrigeration system.
Its function is to remove heat of the vapour refrigerant discharged form the compressor.
The hot vapour refrigerant consists of the heat absorbed by the evaporator and the heat of compression added by the mechanical energy of the compressor motor.  

10. DIAGRAM

11. EVAPORATOR
The evaporator is an important device used in the low pressure side of a refrigeration system.
The liquid refrigerant from the expansion vale enters into evaporator where it boils and changes into vapour.
The function of and evaporator is to absorb heat form the surrounding location or medium which is to be cooled, by means of the refrigerant.

12. DIAGRAM

13. COLD WATER TANK
The shell and coil evaporators are generally dry expansion evaporators to chill water.
The cooling coil is continuous tube that can be in the form of a single spiral.
The shell may be sealed or open.
The sealed shells are usually found in shell and coil evaporators used to cool drinking water 

14. DIAGRAM

15. EXPANSION DEVICE
The expansion device is an important device that divides the high pressure side and low pressure side of a refrigerating system.
It is connected between the receiver and the evaporator.
The following are the functions of the expansion device. 
It reduces the high pressure liquid refrigerant to low pressure liquid refrigerant before being fed to the evaporator.
It maintains the desired pressure difference between the high and low pressure sides of the system, so that the liquid refrigerant vaporizes at the designed pressure in the evaporator. 
It controls the flow of refrigerant according to the load on the evaporator.

16. DIAGRAM

17. CIRCUIT DIAGRAM

18. ADVANTAGES Simple in construction
Simple in construction
This system is noiseless in operation
It is portable, so it can be transferred easily from one place to other place
Power consumption is less
Maintenance cost is low

19. APPLICATIONS Domestic Application Office and Bank Application
Domestic Application
Office and Bank Application
It is very much useful in College and Schools

21. CONCLUSION
In this changing modern world every day there is a new discovery in all fields of science and technology, benefiting the mankind.
 In this work the design of water cooler is slightly modified with an addition of air conditioner. By using this system there is no need of going for a separate air conditioner and water cooler. If one utilizes energy which goes as waste even more useful things can be made.

22. THANK YOU