1. Make a connection and relationship of wood
Plane The Wood

2. Learning Objectives:
Students can explain the procedures that governed the selection of wood and applied according to company requirements. 
Students can choose the appropriate timber based on its quality procedures. 
Students can harvest timber properly.
Teknik Konstruksi Kayu

3. Kinds of Plane Various kinds of crabs are often used is: Jack plane
smooth plane
jointer plane
rabbet plane
spoke shave
Teknik Konstruksi Kayu

4. Section crab
Crab house
Crab eyes
Baji crab
Teknik Konstruksi Kayu

5. Setting Crab PROCESS
Teknik Konstruksi Kayu

6. Step work plane
Preparing the work piece in the size of a / net should consider steps - steps that work properly and systematically, such as the following:  The first plane side of the board width (face 1) first to clean the desired size, then give a sign that the harvest has been completed properly.  Both sides reap the thick planks (face 2) until the desired size. 
Teknik Konstruksi Kayu

7. Step harvest work (continued)
Third reaping results signaled that the surface of a wide board (face 1) have been perpendicular to the surface of thick boards (face 2).  The fourth plane thick side boards (face 3). The fifth plane wide boards side (face 4).  The sixth cut the length of the board according secant existing 
Teknik Konstruksi Kayu

8. Step harvest work (continued)
First  Reap the broad side
Second
Thick side of the plane
Third  Tick  perpendicular
Fourth  Reap the broad side  Until the desired size
Fifth  Thick side of the plane  Until the desired size
Sixth  Cut length
Teknik Konstruksi Kayu

9. Example
Teknologi dan Rekayasa

10. Thank You
Teknologi dan Rekayasa