1. PREPARED BY, HIMALI BHATT 130470105003 DEDAKIYA KRISHNA 130470105016
GLASS
PREPARED BY, HIMALI BHATT DEDAKIYA KRISHNA

2. What is Glass?
Fusion of sand (SiO2), soda (Na2CO3) & lime (CaO) that produces a transparent solid when cooled.
A 3D network of atoms which lacks the repeated, orderly arrangement typical of crystalline materials.
Physical properties: hard, elastic, brittle, non-conductor of electricity, density, refractive index, etc.
Chemical: resistant to all but fluorine and very strong bases.

3. Forensic Examination of Glass
Goals in examining glass evidence:
Determine the types of glass at the scene
Determine how the glass was fractured
Use physical characteristics to classify it
Individualize the glass to a source
Compare physical and chemical characteristics:
Optical properties: color and refractive index
Non-optical properties: surface wear, striations from manufacturing, thickness, surface film or dirt, hardness, density
Chemical properties: additives or trace elements

4. What Types of Glass Are There?
The primary uses for glass are in windows, containers, light bulbs and eyewear.
Borosilicate Glass (pyrex): 5% borax (Na2B4O7) is added to resist breaking when heated or cooled.
Colored Glass: metal oxides or colloidal iron (Fe) & sulfur (S) are added to change its color.
Lead glass: Pb increases refractive index & density

5. What Types of Glass Are There?
Flat glass: made by a “float glass process”; molten glass is floated on a pool of tin while cooling. Commonly found in doors and windows.
Laminated glass: used in windshields, two sheets of glass with plastic between them.
Tempered safety glass: used in car side windows and designed to break into tiny pieces; potassium (K) replaces sodium (Na) on the surface.

6. How Do Glass Windows Break?
Each force causes a deformation that may leave a visible mark or fracture the glass. This can be used to determine the direction and amount of force.
Glass acts initially as an elastic surface and bends away when a force is applied. When the force increases beyond its tensile strength, it cracks.

7. How Does Glass Break?
Radial cracks form first and are propagated in short segments on the side opposite the force.
Concentric cracks come later from continued pressure on the same side as the force applied.

8. How Does Glass Break?
Edges of broken pieces of glass will show rib (“stress”) marks.
In a radial crack, the rib marks are perpendicular to unloaded side and parallel to loaded side. The arrow shows the side that received the impact.
3R rule:
Radial cracks give rib marks that make
Right angles on the
Reverse side from where the force was applied

9. Exceptions to the Three R Rule
Tempered glass
“dices” without forming ridges
Very small windows held tightly in frame
can’t bend or bulge appreciably
Windows broken by heat or explosion
no “point of impact”
curved, smooth edges at break points

10. Types of Fractures by Projectiles
Bullets are a projectile force (load) that can pass through glass.
Load side is the entrance side; unloaded side is the exit side.
Low-speed projectiles: rib marks may indicate where breaking force was applied
As the bullet’s velocity increases, the central hole becomes smaller, cracking patterns become simpler, and the exit hole becomes wider than the entrance hole.

11. Which side was the bullet fired from?
Fractures by Projectiles
Which side was the bullet fired from?
Exit (unloaded) side is wider than entry (load) side.
Stress lines on the glass edge of radial cracks form a right angle on the reverse side from the force.
Stress lines on the glass edge of concentric cracks form a right angle on the same side as the force.

12. Which Bullet Hole Was First?
The sequence of impacts can be determined since crack propagation is stopped by earlier cracks.
In the figure above, which impact occurred first?

13. Putting it Back Together Again?
Examiners can fit together two or more pieces of glass that were broken from the same object.
Because glass is amorphous, no two glass objects will break the same way.

14. Learning Check
In the figure below & left, which impact occurred first?
In the figure above & right, from which side did the impact occur?

15. Glass Transfer Evidence
When glass objects are broken, glass flies backward from all parts of the object where cracks appear not just from point of impact.
This creates a shower of minute glass particles and a transfer of evidence.
Glass fragment comparison depends finding and measuring properties that will associate one glass fragment with another while eliminating other sources.

16. Collection of Glass Samples
The glass fragments should be packaged in boxes to avoid further breakage.
If evidence is to be examined for glass fragments, it should be taken whole and each item individually wrapped in paper and boxed.
If even the remotest possibility exists that glass fragments may be pieced together, every effort must be made to collect all glass fragments.
Submit glass evidence along with a representative sample of each type of glass from the crime scene.

17. Optical Properties of Glass
Make side-by-side comparisons using similar-sized fragments.
Place samples on a white surface using natural light.
Use both fluorescent and incandescent light to determine the glass’s color.
Visual color analysis is very subjective.
Dyes and pigments can be almost impossible to extract.

18. Nonoptical Physical Properties of Glass
Surface striations and markings
Rollers leave parallel ream marks on sheet glass
Markings may indicate the glass’s orientation when pieces are missing
Surface scratches, etchings, and other markings may also be used to individualize evidence
Other Properties
Hardness=5-6 on Mohs scale; use a scratch test.
Determinations of curvature can distinguish flat glass from container, decorative, or ophthalmic.

19. Why Measure Density?
Can be used as a screening technique with large numbers of fragments.
Useful in identifying multiple sources present in the known and/or questioned samples.
It is nondestructive and an intensive property (not dependant on sample mass).
Need to measure very precisely in parts per hundred or thousand or better.

20. Glass Density Density can be measured by:
directly determining mass and volume (usually by displacement)
comparison by flotation
comparison using a density gradient column
Density gradient column method:
Fragments of different densities settle at different levels in the column of liquid of varying density.
Technique is not accurate for fragments that are cracked or contain an inclusion.

21. Density by the Flotation Method
A glass particle is immersed in a liquid. The density of the liquid is adjusted by the addition of small amounts of another liquid until the glass chip remains suspended.
At this point, the glass will have the same density as the liquid medium and can be compared to other relevant pieces of glass which will remain suspended, sink, or float.

22. Why Measure Refractive Index?
Refractive index: ratio of the velocity of light in a vacuum to the velocity of light in any other medium
For example, at 25oC the refractive index of water is This means that light travels times faster in a vacuum than it does in water.
Like density, refractive index is an intensive property but it can be measured very precisely (±0.0002) and does not destroy the sample.
Refractive index of glass varies with small changes in composition or by how it is manufactured.

23. Refractive Index By Immersion

24. Refractive Index By Immersion
Immersing a glass particle in a liquid medium (silicone oil) whose refractive index can varied with temperature until it is equal to that of the glass particle.
At this point, known as the match point, the Becke line disappears and minimum contrast between liquid and particle is observed: RI oil = RI glass.
The Becke line is a bright halo near the boarder of a particle that is immersed in a liquid of a different refractive index.

25. THANK YOU