1. Configuration and Monitoring
3DVision
Configuration and Monitoring

2. Agenda Features Configuration Mode Advance Mode FW update
SCADA integration
Demo mode
Hands-On

3. Features
The 3DVision enables real-time assessment of inventories of bulk solids stored in vessels of any type or size
Provide managers with accurate and timely information on which to base critical decisions for successful plant management
The 3DMultiVision works in conjunction with the 3D Solids Scanner
The application collects data from the monitored vessels and generates reports that can be used to increase operational efficiency and provide valuable real-time and historical data
The 3DMultiVision enables you to perform the same functions for groups of vessels, even across multiple sites in large geographic regions, combines and merges the data, and generates reports
Managers and staff with appropriate authorization can view this information from any location in the world over a common LAN, WAN or wireless communication

4. Features (cont.) Demo mode for sales purposes
The 3DVision is limited to a single vessel and used in Multi Scanner systems
Microsoft .Net Framework 3.5 SP1 must be installed on the computers running the 3DVision Server and clients (Provided in the installation package)
Install the 3DVision Server application on a dedicated computer
Install the Client application on customer’s PCs
Installation is made by a simple setup wizard
Server application:
Always runs in background (make sure it is also located at the startup folder of Windows)
Multiple remote clients can be connected at the same time
Stores the history and logs of measurements
Demo mode for sales purposes

5. Features (cont.) Two modes of operation:
Device Configuration (default)
Advanced Connection
Advanced Multi-Server – Multi-Client application
Manage multiple vessels – 3DMultiVision
Easy-to-use graphic interface
3DMultiVision is free for use for 30 days, than a license is required
Default TCP ports in use: 22220, 22221, and 22223
Hierarchy organized: Sites – Vessels – Scanners

6. Configuration Mode Simple intuitive way of configuring a device
Work flow:
Select Connection details
Select polling Address
Connect to the scanner
Use Configuration Wizard

7. Advance Mode Server-Client topology
Project with hierarchy: Site-Vessel-Scanner
Requires license to activate 3DMultiVision
Advanced features such as reports, materials and users management

8. Update Firmware Update FW is necessary before every new installation
Positioned at Device-> Device Activations
When dialog window opens, Select “Update FW” Tab
Select scanner or scanners to be updated from scanner list
Press brows button, and Select LDR file
Press start update

9. SCADA Integration
The 3DVision and 3DMultiVision has integration capabilities (Multi or Single scanner systems).
Positioned at Tools -> Server Options
Under Server Option, select SCADA integration.
In order to make the integration the customer should provide a Port number that will make the link between the SCADA and Server.
The Server is passive, and provides info as per SCADA request

10. SCADA Integration When integrating 5708 with DeltaV – Manual
When integrating 5708 with Ovation – Manual

11. 3DVision – Demo mode

12. Hands-On Install the SW on your computer
Run Configuration mode and connect scanner
Configure a scanner
Menus, functions and various operations on the scanner
Advanced mode and multi vessel project.