1. *Boyle’s Law *Charles’s Law Gay-Lussac Combined Gas Law
Gas Laws
*Boyle’s Law
*Charles’s Law
Gay-Lussac
Combined Gas Law

2. Properties of Gases Gas properties can be modeled using math.
Model depends on:
V = volume of the gas (liters, L)
T = temperature (Kelvin, K)
P = pressure (atmospheres, atm)
n = amount (moles, mol)

3. Pressure - Temperature - Volume Relationship
P T V
P T V
P T V
Pressure versus volume
– At constant temperature, the kinetic energy of the molecules of a gas and the root mean square speed remain unchanged.
– If a given gas sample is allowed to occupy a larger volume, the speed of the molecules doesn’t change, but the density of the gas decreases and the average distance between the molecules increases: they collide with one another and with the walls of the container less often, leading to a decrease in pressure.
– Increasing the pressure forces the molecules closer together and increases the density, until the collective impact of the collisions of the molecules with the walls of the container balances the applied pressure.
Volume versus temperature
– Raising the temperature of a gas increases the average kinetic energy and the root mean square speed (and the average speed) of the gas molecules.
– As the temperature increases, the molecules collide with the walls of the container more frequently and with greater force, thereby increasing the pressure unless the volume increases to reduce the pressure
– An increase in temperature must be offset by an increase in volume for the net impact (pressure) of the gas molecules on the container walls to remain unchanged.
Pressure of gas mixtures
– If gaseous molecules do not interact, then the presence of one gas in a gas mixture will have no effect on the pressure exerted by another, and Dalton’s law of partial pressures holds.
Boyle’s P 1 V a
Charles V T a
Gay-Lussac’s P T a

4. Pressure and Balloons B When balloon is being filled: PA > PB A
When balloon is filled and tied:
PA = PB
When balloon deflates:
PA < PB
A = pressure exerted BY balloon
B = pressure exerted ON balloon

5. Balloon Riddle A B C When the balloons are untied,
will the large balloon (A) inflate
the small balloon (B); will they
end up the same size or will the
small balloon inflate the large
balloon?
Why? B C

6. Robert Boyle
Robert Boyle, an Irish chemist ( ), performed the first quantitative experiments on gases used a j-shaped tube to study the relationship between the pressure of the trapped gas and its volume.

7. Boyle’s Law
Boyle’s Law states that at constant temperature (and constant number of gas molecules) the volume of a fixed amount of gas is inversely proportional to its pressure.
Boyle’s Law P 1 V a
___

8. Boyle Proves Changes in Pressure cause Changes in Volume
As the pressure in a closed system (like a piston) decreases, the volume of the gas inside the system increases. The pressure in the system decreases exponentially. Proving an indirect relationship.

9. Does Boyle’s law really work?
Since Boyle’s experiments (only three centuries of technological advances!) we have found that his law only holds precisely at very low pressures.
We describe a gas that strictly follows Boyle’s law an “ideal gas”.

10. Jacques Charles
In the century following Boyle, a French physicist, Jacques Charles ( ), was the first person to fill a balloon with hydrogen gas and who made the first solo balloon flight.

11. Charles’s Law
Charles’s Law states that at constant pressure (and constant number of gas molecules) the volume of a fixed amount of gas is directly proportional to its temperature.
Charles V a T

12. Volume vs. Temperature: Charles’ Law
Notice the linear relationship. This relationship between temperature and volume describes a “direct relationship”. This means when temperature increases, so does the volume.

13. Gay-Lussac
Joseph Louis Gay-Lussac was a French chemist and physicist. He is known mostly for two laws related to gases, and for his work on alcohol-water mixtures, which led to the degrees Gay-Lussac used to measure alcoholic beverages in many countries.
1778 – 1850
Charles's law, describing how gases tend to expand when heated, was formulated by Joseph Louis Gay-Lussac in 1802, but he credited it to unpublished work by Jacques Charles.

14. Gay-Lussac’s Gas Law
The pressure of a fixed mass and fixed volume of a gas is directly proportional to the gas's temperature.

15. The Combined Gas Law
The combined gas law was derived from Boyle’s and Charles’s work. A direct relationship was observed. As temperature increased, volume increased. As volume increased pressure increased. This resulted in a combined formula to calculate changes observed in a gas due to changes in either temperature, pressure or volume.

16. Combined Gas Law Equation
By combining the equation for Boyle’s Law and Charles’s Law. We derive the Combined Gas Law Equation where:

17. Summary: Boyle’s Law – Inverse relationship when PV and if PV
Charles’s Law -- Direct relationship
When VT and if VT
Gay-Lussac Law -- Direct relationship
When PT and if PT

18. The importance of 0 Kelvin
At temperatures below 0 K, the extrapolated volume of gases would be negative. The fact that a gas can’t have a negative volume tells us 0 K has a special significance.
Absolute temperature is measured in Kelvins. At 0 K, all motion of any atom or bond ceases, therefore producing no energy. Temperatures of approximately K have been produced in laboratories, but 0 K has never been reached.