1. Date of download: 10/7/2017
Copyright © ASME. All rights reserved.
From: Effect of Shape of the Tip in Determining Interphase Properties in Fiber Reinforced Plastic Composites Using Nanoindentation
J. Eng. Mater. Technol. 2008;130(4): doi: /
Figure Legend:
AFM surface plot showing the circular indent made by the parabolic tungsten tip in the sample P16f and section analysis of the symmetrical indent showing pile-up on the sides of the indent

2. Date of download: 10/7/2017
Copyright © ASME. All rights reserved.
From: Effect of Shape of the Tip in Determining Interphase Properties in Fiber Reinforced Plastic Composites Using Nanoindentation
J. Eng. Mater. Technol. 2008;130(4): doi: /
Figure Legend:
AFM section analysis of a fiber-reinforced polyester composite sample

3. Date of download: 10/7/2017
Copyright © ASME. All rights reserved.
From: Effect of Shape of the Tip in Determining Interphase Properties in Fiber Reinforced Plastic Composites Using Nanoindentation
J. Eng. Mater. Technol. 2008;130(4): doi: /
Figure Legend:
(a) SEM image of parabolic tip before indentation at a magnification of 5000×; (b) SEM image of tip after indentation at a magnification of 5000×

4. Date of download: 10/7/2017
Copyright © ASME. All rights reserved.
From: Effect of Shape of the Tip in Determining Interphase Properties in Fiber Reinforced Plastic Composites Using Nanoindentation
J. Eng. Mater. Technol. 2008;130(4): doi: /
Figure Legend:
((1a) and (2a)) Phase images of the MPS and OTS samples. ((1b) and (2b)) Average section analysis of the MPS and OTS samples. ((1c) and (2c)) Average phase shift of the bulk fiber, interphase, and the bulk polyester matrix of the MPS and OTS samples.