1. RECONSTITUTION, STABILITY AND STERILITY OF INJECTABLE DRUGS
Presenter:
Deus D. Sinibagiye (Pharmacist)
PHARMACY DEPARTMENT

2. Presentation Outline Introduction
Stability of different drugs after reconstitution
Use and sterility of drugs packaged in Ampoules
Drug Interaction

3. Introduction
Drugs administered by injections are packaged in several ways.
Those that deteriorate in solution are usually dispensed as powders and reconstituted immediately before administration
Stable drugs in solution are packaged in ampoules (single dose/unit dose), bottles or vials in an aqueous, oily, emulsion and suspension

4. Many drugs used as sterile products, especially antibiotics are made as dry powder form.
It is extremely important that the correct diluents be selected and appropriate calculations performed to ensure correct concentrations and stability of finished product.
Antibiotics in powder form generally have an extended shelf life; however, once diluted most antibiotics lose their potency after a relatively short period of time

5. Reconstitution
Reconstitution is a process of combining dry form of a mixture with a vehicle to achieve a usable state.
It is also the process of diluting liquid concentrate to achieve a usable state.

6. Diluent
Diluent is a clinically inactive ingredient/liquid used to dilute or reconstitute a medication.
It is also used to convert a dry form of a substance to a liquid form.
When reconstituting medications, read the directions to find out which diluent needs to be used.

7. Water or normal saline (NS) solution is often used to dilute medicines and to liquefy dry powdered forms of medicines.
Diluents are typically inserted with a syringe through the rubber stopper of the medication vial for injectable drugs.
For Oral or topical suspension, the diluent is measured properly, added to the medication container and shaken really well to ensure powders are dissolved properly

8. Stability of drugs after reconstitution
DRUG NAME
STABILITY AFTER RECONSTITUTION
STORAGE(°C)
DILUENT
AMPICILLIN INJ
8HRS
<25
NS/WFI
CLOXACILLIN INJ
24HRS/48HRS
<25/(2-8)
NS/WFI/D5W
BENZYL PENICILLIN INJ
24HRS/7DAYS
BENZATHINE PENICILLIN INJ.
FORTIFIED PROCAIN PENICILLIN (PPF) INJ
NS/WFI/D5W/lidocain
CEFTRIAXONE
3DAYS/10DAYS
WFI/D5W/D10%
CEFOTAXIME INJ
12HRS/5-7DAYS
WFI
MEROPENEN INJ
1HR
WFI/NS/D5%/D10%
HYDROCORTISONE INJ
4HRS
WFI/D5%/NS
CHLORAMPHENICOL INJ
24HRS
ARTESUNATE INJ
0.9%NS

9. Amoxicillin +Clavulanic acid injection
AUGMENTIN intravenous should be given by slow intravenous injection over a period of 3-4 minutes and within 20 minutes of reconstitution.
It may be injected directly into the vein or via a drip tube.

10. To prepare AUGMENTIN for intravenous infusion, add without delay 600mg reconstituted solution to 50mL normal saline infusion or 1.2g reconstituted solution to 100mL normal saline infusion fluid
Infuse over minutes and complete within the time stated.
Satisfactory Augmentin concentrations are retained at 5°C and at room temperature (25°C) in the recommended volumes of the following infusion fluids.
If reconstituted and maintained at room temperature, infusions should be completed within the time stated

11. Intravenous Infusion
Stability Period 250C
Water for Injection BP
4Hr
Sodium Chloride Intravenous Infusion B.P. (0.9% W/V)
4HR
Sodium Lactate Intravenous Infusion B.P. (M/6)
Compound Sodium Chloride Injection B.P.C 1959 (Ringer’s)
3HR
Compound Sodium Lactate Intravenous Infusion B.P (Ringer – Lactate: Hartmann’s)
Potassium Chloride and Sodium Chloride Intravenous Infusion B.P

12. Any residual Augmentin solutions should be discarded.
AUGMENTIN vials are not suitable for multi-dose use.
AUGMENTIN intravenous is less stable in infusions containing glucose, dextran or bicarbonate.
Reconstituted solution should, therefore, not be added to such infusions but may be injected into the drip tubing over a period of 3-4 minutes.

13. Ampicillin Stability
I.V minimum volume: Concentration should not exceed 30mg/ml due to concentration stability restrictions

14. Stability at Room Temp(250C)
DILUENT
CONC
STABILITY PERIOD
Sterile water for injection
Up to 30mg/ml
8hrs
Isotonic sodium chloride
5% dextrose in water
10 to 20mg/ml
1hr
Up to 2mg/ml
2hrs
5% dextrose in 0.45%NaCl
Lactated Ringer’s solution

15. Stability when Refrigerated (40C)
DILUENT
CONC
STABILITY
Sterile water for injection
30mg/ml
48hrs
Up to 20mg/ml
72hrs
Isotonic sodium chloride
24hrs
Lactated Ringer’s solution
Up to 30mg/ml
5% dextrose in water
1hr
Up to 10mg/ml

16. Meropenem Injection
Meropenem for Injection to be used for bolus intravenous injection should be constituted with sterile Water for Injection (10mL per 500 mg Meropenem).
This provides an approximate available concentration of 50 mg/mL.
Reconstituted solutions are both clear and colourless to pale yellow

17. Meropenem Injection to be used for intravenous infusion may be directly reconstituted with a compatible infusion fluid and then further diluted (50 to 200 mL) with the compatible infusion fluid

18. Shake reconstituted solution before use
Standard aseptic technique should be employed during reconstitution and administration

19. Ampoules
An ampoule is a glass flask that contains a single dose of medication for parenteral administration

20. There is no way to prevent air bone contamination of any unused portion of medication after an ampule is opened.
If all the medications is not used, the remainder must be discarded.
All drugs which are in ampules when are opened, they have to be used once due to stability and sterility of the drug.

21. Examples ATROPINE Calcium Gluconate IV Digoxin IV
Dobutamine-within 6hrs
Adrenaline
Gentamicin
Phenobarbitone
Vitamin k-shortly after preparation

22. Interactions
Some powdered drugs (injectable) tend to interact with some diluent hence they are not suitable to be used together
Ceftriaxone interact with ringer lactate(due to calcium) and form precipitates which will affects the kidney and lungs of the patient
Not recommended to be used together.

23. Vancomycin, aminoglycosides, and fluconazole are incompatible with ceftriaxone in admixtures.
When any of these drugs are to be administered concomitantly with ceftriaxone by intermittent intravenous infusion, it is recommended that they be given sequentially, with thorough flushing of the intravenous lines (with one of the compatible fluids) between the administrations

24. Probenecid decreases the renal tubular secretion of amoxicillin
Concomitant use with AUGMENTIN may result in increased and prolonged blood levels of amoxicillin, but not of clavulanic acid
Concomitant use of probenecid is not recommended
Concomitant use of allopurinol during treatment with amoxicillin can increase the likelihood of allergic skin reactions

25. A clinically significant reduction in serum valproic acid concentration has been reported in patients receiving carbapenem antibiotics resulting a % decrease valproic acid levels in about two days
The concomitant use of meropenem and valproic acid/sodium valproate/valpromide is not recommended.

26. Probenecid competes with meropenem for active tubular secretion and thus inhibits the renal excretion of meropenem with the effect of increasing the elimination half-life and plasma concentration of meropenem

28. Clinical Relevance
Reconstituted medications for multidose use are the one exception to the rule, “Never give a medication prepared by someone else”
The exception may be made only if the label is clearly marked with all the requires data
Reconstituted medications with labels that are annotated with all the required data must be discarded to avoid giving an ineffective drug or a spoiled liquid

29. Because of the cost and short shelf life of reconstituted medications, it is appropriate that the nurse review the patient’s records and recent orders to be sure that the medication order has not expired before preparing the medication

30. References
Neonatal Parenteral medications stability Manual King Abdullah University Hospital
New Zealand Data Sheet of Meropenem
hydrocortisone sodium succinate for injection, USP
Lippincot photo atlas of medication administration

31. THANK YOU