1. KY-MF-1

2. Our Company

3. CTFA Name
Acrylates copolymer
CAS: No

4. Sample

5. Introduction lightly cross-linked acrylate copolymer.
acrylic rheology modifier
suspend, stabilize, thicken, and enhance the appearance

6. Properties excellent suspending and stabilizing
thickening and desirable flow characteristics
high clarity products
synergistically with salts

7. 添加标题 Use Clear shampoos, bath gels and cleansers.
Pearlescent shampoos and washes.
Conditioning products with high molecular weight silicones.
Low pH facial and body curbs.
Soap-based cleansing systems.

8. Product Data Sheet Appearance: white emulsion Odor: mild
pH range: (5%)
Density(25℃) g/ml
Solid content: ± 2%
Viscosity(25℃):cps
Acrylate ethyl ＜1ppm
Viscosity(25℃)(1%
neutralize to pH=7):cps ＜100

9. Benefits Easy-to-use Suspension and stabilization
Thickening and flow control
Clear formulation
Excellent compatibility
Synergistic Thickening with Salt
Storage Period
Enhanced Pearlization
Higher pH

10. 1: Viscosity in surfactants
COMPARE
1: Viscosity in surfactants
KY-MF-1 has lower viscosity, but in surfactant it displays better synergistic properties
Example:
Name % (w/w)
Water
KY-SF
Use KOH adjusts pH = 7.5, viscosity only 3500Cp,

11. 2: suspending in surfactants
COMPARE
2: suspending in surfactants
For such insoluble ingredients
Gelatin-based and other beads and capsules,
Polyethylene, Pumice, Walnut shell, Loofah
Result
Compare with SF-1, KY-SF-1 use same quantity of SF-1 and adjust same viscosity and same pH, we get the same suspending ability

12. 1: Viscosity in surfactants
COMPARE
1: Viscosity in surfactants
but another example
Name % (w/w)
Water
SLES 70%
KY-SF
Use KOH adjust pH = 7.5, the viscosity achieve 8500cps

13. COMPARE 3: Thickening Ability Formulation:
Name % (w/w)
SLES
Cocamide DEA
Cocamodopropyl Betaine
SF-1 / KY-SF
Use KOH to adjust pH = 7.0
Viscosity of the above formula with:
KY-SF cps
SF cps

14. COMPARE

15. COMPARE 4: Clear formulation ----------- -----------
KY-MF-1 enables the formulation of highly transparent shampoo and body washes at pH = 7. Compare with Other Acrylate Copolymer, KY-SF-1 can add a little more salts for clear formulations. A
KY-MF-1
Other Acrylate Copolymer
98% A
Tranparancy
Salt
Sodium chloride
0.1%
1.0%
Salt%

16. COMPARE V 5: Synergistic Thickening with Salt
KY-MF-1 works synergistic with low level of salt to increase suspension and viscosity when the polymer is formulated with surfactants. V
KY-MF-1
Other Acrylate Copolymer
CPS V
Viscosity
Salt
Sodium chloride
Salt%

17. 6: pH: “Back-Acid” Thickening
COMPARE
6: pH: “Back-Acid” Thickening
The KY-MF-1 is not necessary to use this process.

18. COMPARE 7: Storage Period
Put KY-SF-1 and SF-1 in 48oC oven, after one month, get out to use in formulation to check its suspension ability.
For suspension ability of:
KY-MF No change
Other Acrylate Copolymer Decrease

19. COMPARE
1: Freeze Test
For other acrylate copolymer, If we put in -15 ℃ for one week, it can not restore , But for KY-MF-1, It have no problem.
Test ℃
Name Time Result
KY-MF week Pass
Other Acrylate Copolymer
1 week Pass

20. Suspension Example Formula Name % Water 50.9 Sodium Laureth Sulfide 8
Cocoamide Dea
KY-CAB
KY-SF
Water
KOH
DMDMH
Perfume q.s
Salt q.s
Partical
Adjust viscosity to 10000cs

21. Suspension Example Stability Test: Temp. Time Result 48 ℃ 3 month Pass
Room Temp years pass

22. Addition Process
1). Add primary anionic and nonionic surfactant, for example: Sodium Lauryl Sulfate, Soidum Lauryl Ether Sulfates.
2). Add remaining surfactants, for example: Amphoterics.
3). Add conditioning and ancillary ingredients, for example: silicones, cationics, EDTA.
4). If desired, add pearlizing agent, for example: mica, EGDS, EGMS.
5). Add KY-SF-1 (first mix with water KY-SF-1 ÷ water = 1÷1)
6). Neutralize pH = 6.5 to 7.5 with TEA or KOH or citric acid.
7). Add fragrance, dyes and preservatives.
8). If desired, add sodium chloride or CAB-35 to further increase viscosity.

23. Thanks for watching