Presentation is loading. Please wait.

Presentation is loading. Please wait.

EE 478 Final project Alex Ching, Kuei-Hsuan Lu, Wenjie Zheng

Similar presentations


Presentation on theme: "EE 478 Final project Alex Ching, Kuei-Hsuan Lu, Wenjie Zheng"— Presentation transcript:

1 EE 478 Final project Alex Ching, Kuei-Hsuan Lu, Wenjie Zheng
Smart band EE 478 Final project Alex Ching, Kuei-Hsuan Lu, Wenjie Zheng

2 Who are we Alex Ching - Hardware Wenjie Zheng - Sensors & Algorithms
Kuei-Hsuan Lu - XBee

3 Project User: Patient Working environment: Hospital sickroom Goal:
Monitoring patient’s medical parameters and send warning signals wirelessly. Detect hand gestures to remotely control other devices.

4 Features: Sensors Warning signals Hand gestures detection
Real time watch Wireless

5 Sensors Heart beat rate Room temperature Accelerometer 4. Pressure
Analog IR-Sensor with amplifier Room temperature I2C Temperature sensor Accelerometer I2C MMA8452A 4. Pressure Analog Pressure Sensor

6 Band working mode In-Bed Mode Walking Mode Real time display Yes
Heatbeat measure Temperature measure Remote control No Falling detect Warning detect

7 Real time clock Sensor: Real time clock sensor (I2C)
Time initialization Time reset Time display on GLCD hh:mm:ss day date/month/year

8 Hand Gesture Detection
Sensor: MMA8452A accelerometer. Motion detect: Left-tilt Right-tilt Up-tilt Down-tilt Switch mode hand gestures: In-bed Mode Walking Mode

9 WARNING SIGNALS 1. Low(36 BPM)/High(120 BPM) Heartbeat rate
2. High(33°C)/low(15°C) room temperature 3. Falling detection 4. ‘Need help’ hand gesture.

10 Doctor side (warning signal receiver)
Receive from :Xbee Once receive warning: Always: PWM sound alarm. Warning Type LED color Heartbeat Warning Yellow Room temp Warning Green Falling Warning Red ‘Need help’ Warning Blue

11 PCB design: Make things smaller

12 PCB

13 Hub

14 Case

15 Problems PCB circuit XBee data loss I2C addressing
PIC to Arduino interface LCD

16 Solution Rework XBee still in progress Address changes Bypass circuit
Delays and bypass capacitors

17 What would we change Funding Two PCB runs Better amplifier circuit
Smaller package LED Matrix Add more features and gestures

18 Current Status PCB done powered on battery Sensors receiving data
LCD library done XBees communicating (Delays) Testing integrated system SD Card (Maybe) LED Matrix (Maybe)

19 Questions ?


Download ppt "EE 478 Final project Alex Ching, Kuei-Hsuan Lu, Wenjie Zheng"

Similar presentations


Ads by Google