1. UOP ECT 246 Week 5 iLab Op-Amps Check this A+ tutorial guideline at http://www.assignmentcloud.com/ect-246/ect-246-week-5-ilab-op-amps For more classes visit http://www.assignmentcloud.com ECT 246 Week 5 iLab Op-Amps In week five, you will create several circuits using the operation amplifiers you studied earlier. An op-amp can be configured to perform special applications found in everyday electronic equipment. These include comparators, level detectors, summing amplifiers and digital to analog converters. A.Describe the operation of a level detector. a.Explain the operation of the following circuit. B.Determine the output of a level detector for a given reference voltage. Simulate a level detector and verify that the simulated voltages agree with the calculated values. C.Explain the operation of a summing amplifier and how the output voltage is calculated based on the input values. E.Calculate the output voltage of a three input summing amplifier. F.Simulate a summing amplifier with three inputs, measure the results and compare them to the calculated values.