Download presentation
Presentation is loading. Please wait.
Published byShanna Bell Modified over 7 years ago
1
© Janice Regan, CMPT 128, 2007-2012 CMPT 371 Data Communications and Networking FTTP 0
2
FTP File Transfer Protocol An application layer communication protocol used to transfer files from one host to another Often used for downloading files on the Internet We can use FTP without connecting through the WWW (uses port 21) For detailed information about HTTP see RFC 959 Janice Regan © Sept. 2007-2016 1
3
File transfer protocol When we want to copy a file from a remote site we can use FTP When an FTP request is made first a TCP connection is made just to exchange control information. This is called the control connection A second TCP connection will later be made to do the actual transfer of the requested file. This is called the data connection Janice Regan © Sept. 2007-2016 2
4
Control information permissions and passwords indicating that the user attempting the download is permitted to access the file requested for download. Negotiation of the properties (like port) of the data connection Keep track of the state of the user, for example where in the remote directory tree he is, so the file to transfer can be identified Janice Regan © Sept. 2007-2016 3
5
Common Channel Signaling Signals travel independently from data, over a separate common channel The separate channel handles control messages for a number of connections simultaneously. For FTP each file transfers on a separate channel, all transfers are managed using a single channel This makes the signaling protocol and the network architecture more complicated Janice Regan © Sept. 2007-2016 4
6
Steps: using FTP (1) Client contacts server (port 21) Client logs in (to control channel), provides password to verify that he /she has access to the available files Client browses files and chooses desired file or files (using LIST, CWD, LS, CD) Client requests first desired file (using RETR in Windows or GET in linux/unix) Janice Regan © Sept. 2007-2016 5
7
Steps: using FTP (2) Server receives transfer command, opens a 2 nd TCP connection and transfers the file though the 2 nd TCP connection (port 20) When the file has completed transfer the 2 nd TCP connection is closed. Server opens another connection to transfer next requested file. Janice Regan © Sept. 2007-2016 6
8
Examples of FTP Commands sample commands used in the control channel USER username PASS password LIST return list of file in current directory RETR filename retrieves (gets) file STOR filename stores (puts) file onto remote host Janice Regan © Sept. 2007-2016 7
9
Examples of FTP replies 331 Username OK, password required 425 Can’t open data connection 452 Error writing file 125 data connection already open; transfer starting Janice Regan © Sept. 2007-2016 8
10
© Janice Regan, CMPT 128, 2007-2012 CMPT 371 Data Communications and Networking SMTP 9
11
Simple Mail Transfer Protocol An application supporting email communication across the Internet We can use SMTP without connecting through the WWW Primarily a push protocol (sends to server) In contrast HTTP is a pull protocol (requests from server) Janice Regan © Sept. 2007-2016 10
12
SMTP Part of the Internet email system which includes User agents (your mail browser) Email servers SMTP is a protocol to communicate between user agents and Email servers, and between different Email servers For SMTP see RFC 1982 and RFC 2821 Janice Regan © Sept. 2007-2016 11
13
Mail user agents A user agent will provide the tools to Compose mail Read mail Send mail (to a recipient through their mail server) Receive mail (download mail from the server) Archive received mail Forward mail Examples of agents Thunderbird Eudora Outlook Janice Regan © Sept. 2007-2016 12
14
Infrastructure of the Email system Every Email server includes both a SMTP client and an SMTP server Users sending Email are SMTP clients Email servers sending mail are SMTP clients Email servers receiving mail are SMTP servers Every Email server communicates directly (TCP) with other Email servers it wishes to send Email to. Emails are sent directly from the senders Email server to the receivers Email server. No other Email servers take part in the transfer of the email. Janice Regan © Sept. 2007-2016 13
15
Sending Email: Janice Regan © Sept. 2007-2016 14 User 1 User 2 User 1’s Email server User 2’s Email server User 1’s Email agent
16
Mail servers: normal operation When user 1 sends an Email to user 2. The Email will be sent to user 1’s mail server be queued on user 1’s mail server User 1’s mail server will then use TCP to connect to User 2’s Email server User 1’s mail server will then use SMTP to send the Email to the user 2’s mail server When an Email arrives at user 2’s mail server it is placed in user 2’s mail box User 2 can later retrieve the message Janice Regan © Sept. 2007-2016 15
17
Mail servers: problems? When user 1’s mail server uses SMTP to try to send an Email to user 2’s mail server User 1’s server will try to create a TCP connection to the user 2’s server Why might it be impossible to reach user 2’s server? The requested server is down (not operating) The requested server does not exist The requested server is too busy and can not accept the senders TCP connection Janice Regan © Sept. 2007-2016 16
18
If user 2’s Email server is not reached What happens if user 2’s mail server is not available User 1’s Email server will leave the message in the queue and try to resend it again later After some number of retries user1 will received a mail from his mail server indicating that the mail he sent could not be delivered The email user1 sent will be dropped from user 1’s mail server's queue by the mail server Janice Regan © Sept. 2007-2016 17
19
SMTP: legacy protocol SMTP is an relatively old protocol It requires all messages be sent in ASCII (text) format If the message is not in text format then it must be somehow translated into text format (even if you are sending images) Unlike SMTP the newer protocol HTTP does not require this translation Janice Regan © Sept. 2007-2016 18 User (sender) agent Sender’s Mail Server SMTP messages Through direct TCP connection Recipient’ s Mail Server User (recipient) agent
20
MIME extensions For inclusion of non text information in mails Provides methods for translation of non text information into text for transmission using SMTP Information on encodings used will be placed in the header by the sending agent so that the receiving agent can decode the information and reconstruct the non textual information Other information like the RECEIVED line that indicates when the message arrived and from where are added by the receiving mail server before being forwarded to the receiving agent For details see RFC 2045 Janice Regan © Sept. 2007-2016 19
21
You own SMTP server? Where should the SMTP server be? If we place the server on our PC or MAC Machines (receiver and sender) must always be on Machines must always be connected to internet Machines must run server software itself Usually better to have email servers on a network server that is maintained, always on, and always accessible Janice Regan © Sept. 2007-2016 20
22
Sending Email: user1 to user2 Janice Regan © Sept. 2007-2016 21 User 1 User 2 User 1’s Email server User 2’s Email server SMTP push SMPT push POP3 IMAP pull
23
Agents communicate with servers Mail access protocols are used by agents communicating with mail servers to request download of mail (pull operation not push so we don’t use SMTP) Such protocols include POP3 (post office protocol v3) IMAP (internet mail access protocol) HTTP (hotmail and webmail) Janice Regan © Sept. 2007-2016 22
24
POP3 (post office protocol) Details in RFC 1939 A simple mail server access protocol (for downloading received mail) The user agent connects to the mail server through a TCP connection Once the connection is made POP3 will check the authorization (username, password etc.) of the user The user agent then performs transactions needed to download the user’s Email Janice Regan © Sept. 2007-2016 23
25
POP 3: login session S: +OK POP3 server ready C: user janice S: +OK C: pass tigermoth S: +OK user successfully logged on Janice Regan © Sept. 2007-2016 24
26
POP 3: download session C: list S: 1 765 S: 2 225 S:. C: retr 1 S: S:. C: dele 1 …… C: retr 2 S: S:. C: dele 2 C: quit S: +OK POP3 server signing off Janice Regan © Sept. 2007-2016 25 User selects “download only” or “download and delete”. Red commands only used when “download and delete” mode is selected
27
POP3 The user agent then performs transactions retrieves the users messages from the mail server across the TCP connection (may delete messages as they are retrieved or not. Two modes available) records agent requested deletions etc. and replies to such requests The agent breaks the connection and then the server completes outstanding deletion/modification requests from the agent Once mail is downloaded the user agent allows classification into folders locally. (Not on the mail server) Janice Regan © Sept. 2007-2016 26
28
Pop 3 from multiple clients If a user accesses her email from two different locations, her office and her home then POP has some limitations If POP uses download and delete mode any messages accessed at home have been deleted and cannot be accessed from the office If POP3 uses download only, then the user needs to remember to manually delete mail that she has downloaded in both places Janice Regan © Sept. 2007-2016 27
29
IMAP Details in RFC 2060 A more complex and feature rich mail server access protocol Allows organization of mail into folders on the mail server, so that those folders can be accessed from anywhere, (not just the machine they were downloaded to in the case of POP3) Janice Regan © Sept. 2007-2016 28
30
IMAP This requires more commands in the communication protocol to allow the user to instruct the server to move files and save them in particular folders, to create and move those folders. More flexibility. Accessing from low bandwidth location you can request only message headers be downloaded, than only download the desired messages that are immediately needed. Janice Regan © Sept. 2007-2016 29
31
© Janice Regan, CMPT 128, 2007-2012 CMPT 371 Data Communications and Networking DNS 30
32
Host names In addition to identifying a host by the IP address of a connected interface we also identify the interface by an hostname Hostnames are easier for a human to use and remember that the IP address In the early Internet names were recorded at a central registry at the Network Information Center (NIC). New hosts/names were submitted to the central registry and added to the hosts file The hosts file was available for distribution to all other sites. This was a flat naming structure Janice Regan © Sept. 2007-2016 31
33
Hierarchical name space The central naming system worked well until the Internet grew larger than it could handle (soon after TCP/IP was adopted) The central servers could no longer deal with the volume of traffic The manual updating of names was slow, and maintaining network wide consistency was difficult Enforcing the use of unique names became more difficult (then impossible) Janice Regan © Sept. 2007-2016 32
34
DNS The primary use of DNS is to answer queries requesting the IP address that corresponds to a given host name. Reverse queries, finding the name of a host with a particular IP address are also possible DNS can also support multiple, different names for the same host (computer, mail server, …). The primary name of a host is the canonical hostname A host can be called by names other than it’s canonical hostname, these alternate names are called aliases DNS can also support multiple IPs for the same canonical hostname (used to distribute load) Janice Regan © Sept. 2007-2016 33
35
Addresses an names IP address is a hierarchical system. An IP address consists of four integers between 0 and 256 separated by.’s (example 192.168.3.1). As we scan each group starting at the left and proceeding towards the right we obtain more and more specific information Janice Regan © Sept. 2007-2016 34
36
Addresses an names DNS also uses a hierarchical classification system for domain names. Domain names may represent a network a sub network or even a host Consists of. separated names. As we read from left to right each name represents a smaller and more localized network or even a single host Janice Regan © Sept. 2007-2016 35
37
Hierarchical name space The hierarchical DNS name system was designed to replace this original flat namespace in which each machine had a unique name Administration was decentralized using a distributed database Local administrators were given responsibility for building and maintaining a database relating IP address and name for their designated groups of local networks Janice Regan © Sept. 2007-2016 36
38
DNS Name Tree Janice Regan © Sept. 2007-2016 37 cs arpa com edu gov us uk ca fr bc sfu fraser In-addr ny ca sun nasa jpl. hp Labels may have up to 63 characters fraser Labels (names) may refer to domains (hosts +nets) hosts or networks
39
DNS Name Tree Janice Regan © Sept. 2007-2016 38 cs arpa com edu gov us uk ca fr bc sfu fraser In-addr ny ca sun nasa jpl. hp All children of a given parent must have unique names fraser fred hp1 NO! Children of different parents can have the same name
40
Constructing names: name tree Start at the leaves of the tree The domain for the chosen leaf will be the first part of the name. Add a period to the first part of the name Check the domain name of the root of the current position in the tree. If it is not the root of the tree The domain name of the root of the current position in the tree is added after the period If it is the root of the tree the name is complete Repeat steps 3 and 4 until the name is complete Janice Regan © Sept. 2007-2016 39
41
jpl.nasa.gov. Janice Regan © Sept. 2007-2016 40. cs arpa com edu gov us uk ca fr bc sfu fraser In-addr ny ca sun nasa jpl hp fraser
42
Fully Qualified Domain Name DNS uses fully qualified domain names FQDNs are complete domain names including all parts of the domain name from the domain of interest up to the root Ends in a. to indicate root. For example fraser.sfu.ca. The terminating. Indicates that the name is absolute ( relative to root, not to any other position in the DNS tree) Janice Regan © Sept. 2007-2016 41
43
Domain Names: not fully qualified Domain names that are not fully qualified (do not end at root, like fraser.sfu) may be interpreted by some software as relative to some particular location (other than root) in the DNS tree. Your host must be configured to tell these software applications how to complete a domain name that is not fully qualified (how to convert it to a fully qualified domain name). You must tell the software what locations these names may be relative to. Janice Regan © Sept. 2007-2016 42
44
Authority for the DNS namespace The central internet authority was ICANN (Internet corporation for assigned numbers and names) and is now IANA (Internet assigned numbers authority). Responsibility for the root level. domain rests with IANA TLDs, top level directories for the internet namespace include generic TLDs (gTLDs) like.com or.org for classification of domain names by type of use include country code TLDs (ccTLDs) like.ca or.us for geographical classification of domain names Responsibility for administering the TLDs has been delegated to other contractors by IANA Janice Regan © Sept. 2007-2016 43
45
DNS Name Tree: Domains Janice Regan © Sept. 2007-2016 44 “” Root domain arpa com edu gov us uk ca fr bc sfu cs fraser In-addr ny ca nasa jpl hp Generic Top level domains gTLDS Country code Top level domains ccTLDS
46
Authority for the DNS namespace Any organization to which responsibility for a DNS domain is delegated must provide at least two independent DNS servers to service that domain These DNS servers must be geographically separated These servers must be configured to provide continuous service may delegate authority for parts of the DNS domain for which they are responsible to other organizations. Janice Regan © Sept. 2007-2016 45
47
Authority for the DNS namespace Each DNS server must know the name/address of the servers it has delegated responsibility to. The delegator of authority need not inform all organizations it delegates to of changes made by other such organizations. This is an unreasonable load in a rapidly growing/changing internet. Janice Regan © Sept. 2007-2016 46
48
Authority for the DNS namespace Each DNS server must know the name/address of the servers it has delegated responsibility to. The delegated authority has a responsibility to inform the delegator if address or name of the DNS name server changes. This is necessary to guarantee that address queries can be passed down the tree. Janice Regan © Sept. 2007-2016 47
49
Examples of delegation TLD.ca delegates authority to sfu to manage the domain sfu.ca TLD.ca delegates authority to BC to manage top level domain.bc Domain.bc delegates authority to the BC government to manage domain gov.bc.ca Janice Regan © Sept. 2007-2016 48
50
DNS Name Tree: sub-trees Janice Regan © Sept. 2007-2016 49 cs arpa com edu gov us ca fr bc sfu fraser ny ca nasa jpl. mycomp fraser myhost mynet us domain mycomp domain
51
How many DNS servers? Extrapolating this model we discussed before would have a DNS server for each domain What is the smallest domain? 1 host, host name = domain name Clearly this makes too many servers 1 local network = 2 DNS servers Still too many (lots of small networks) At some reasonable point we need to stop delegating authority Janice Regan © Sept. 2007-2016 50
52
Domain Name System A DNS domain is a sub tree The name of the domain is the domain name of the node at the root of the sub tree The domain includes all domains and hosts below the root of the sub tree.us domain, includes.ca domain and.ny domain.mycomp domain include.mynet domain and host.myhost The administrative responsibility for the domain and its subdomains may be arranged in different ways Janice Regan © Sept. 2007-2016 51
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.