1. Mechanisms © 2011 Project Lead The Way, Inc.Automation and Robotics VEX

2. What is a Mechanism? A mechanism is the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others. Generally used to: –Change the direction of movement –Change the type of movement –Change the speed of movement –Change the amount of torque or force available to do work

3. Mechanisms - Change Direction Meshed gears in a gear train always turn in opposite directions The flow of power is reversible only if you can make the input shaft turn by turning the output shaft

4. Mechanisms - Change Movement Rotary Linear Reciprocating Oscillating

5. Mechanisms - Change Speed Gear ratios compare the output (or driven/follower gear) to the input (or drive gear) If the output gear is larger than the input gear the speed will decrease If the output gear is smaller than the input gear the speed will increase.

6. Mechanisms – Change Force or Torque A force is a push or pull in a straight line. Torque is a push or pull in a circular direction.

7. Simple Gear Train A. B. Driven Drive Driven Drive

8. Where Do You Find a Simple Gear Train? Two meshed gears will rotate in opposite directions. Watch gears Found in: –Watch –Sewing Machine –Motor

9. Simple Gear Train with Idler Driven Drive Idler

10. Where Do You Find a Simple Gear Train with Idler? Two meshed gears will rotate in opposite directions. An Idler Gear allows the drive and driven gears to rotate in the same direction. 8. Found in - Paper Transport Rollers

11. Bevel Gear

12. Where Can You Find a Bevel Gear? The bevel gear is used to change rotational motion at a 90˚ angle. Using gears with differing numbers of teeth will change the speed and torque. Found in: Hand drill Car differential Shaft-driven bicycle

13. Differential Gear 1.Gears used – Bevel 2.Axles turn – Same direction 3.Used in – Vehicles 4.Purpose – Wheels spin at different speeds when turning Howstuffworks.com/differential

14. Worm and Wheel Wheel Worm

15. Where Do You Find a Worm and Wheel? A worm is used to reduce speed and increase torque. The motion is not reversible; a gear cannot drive a worm. Found in: Tuning mechanism on string instruments Electric motors Winch

16. Leadscrew 1. Input Movement rotary 2. Output Movement linear

17. Where Do You Find a Lead Screw? Jack Vice Changes rotary movement into linear movement Significantly increases force A person can put a little force into turning the handle to move a heavy car.

18. Rack and Pinion 1. Input Movement rotary 2. Output Movement linear Pinion Rack

19. Pinion Where Do You Find a Rack and Pinion? Used to convert between rotary and linear motion. Provides gear reduction to make it easier to turn the wheels. Used in steering systems of cars to convert rotary motion of steering wheel to the side to side motion in the wheels. Rack and pinion steeringRack and pinion steering

20. Universal Joint Angular Range: > 90˚ and < 270˚

21. Where Can You Find a Universal Joint? Drive shaft of vehicles Power take-off www.rqriley.com/imagespln/pattersn_ujoint.jpg Universal joints are used to transmit rotary movement at an angle that is not 90°.

22. Chain Drive Larger drive gear: Speed is increased Torque is decreased Smaller drive gear: Speed is decreased Torque is increased Driven Drive Driven

23. Where Do You Find a Chain and Sprocket? Advantage of Chain and Sprocket over spur gears: Transfer torque and speed over long distances Found in: Bicycle Motorcycle

24. Belt Drive Drive Driven

25. Where Do You Find a Pulley and Belt? Found in: Lawn mower Car engine BELTS Belts instead of chains: Quieter Less expensive

26. Crank and Slider Slider Crank

27. Where Do You Find a Crank and Slider? Found in: Steam train Internal combustion engine

28. Cam and Follower CAM FOLLOWER

29. Where Do You Find a Cam and Follower? As a cam rotates, the flat follower is raised and lowered, converting rotary motion to reciprocating (back and forth) motion. Found in: Cam shaft

30. https://www.youtube.com/watch?v=r0y_uNoYqWM&list=PLE539743FE2BE69 6B&index=15 https://www.youtube.com/watch?v=WR931mtC3l4&list=PLE539743FE2BE696 B&index=17 https://www.youtube.com/watch?v=VoBGau9623I&list=PLE539743FE2BE696 B&index=18 https://www.youtube.com/watch?v=wDdmX6yGCuY&list=PLE539743FE2BE6 96B&index=28 https://www.youtube.com/watch?v=Syp3CW9sFbk&list=PLE539743FE2BE69 6B&index=29 https://www.youtube.com/watch?v=u9Bh7JqVw- o&index=30&list=PLE539743FE2BE696B

31. 1.Open Autodesk Inventor. 2.Open the file “00 Wall Assembly (1).iam” located here: T:\Middle School\Melville\Student Technology Files\Vex\Parts\ Wall Assembly

32. Image Resources Microsoft, Inc. (2008). Clip Art. Retrieved from http://office.microsoft.com/en-us/clipart/default.aspx http://office.microsoft.com/en-us/clipart/default.aspx