Presentation is loading. Please wait.

Presentation is loading. Please wait.

Presented By: FERHAN JAMAL ROLL NO - 0712231033 (E.C. Final Year) 1.

Similar presentations


Presentation on theme: "Presented By: FERHAN JAMAL ROLL NO - 0712231033 (E.C. Final Year) 1."— Presentation transcript:

1 Presented By: FERHAN JAMAL ROLL NO - 0712231033 (E.C. Final Year) 1

2 2

3 Assembly shop SHOP 1 SHOP 2 SHOP 3 SHOP 4 ALH Manufacturing shop NGL Shop Smith Shop Gyro shop Press Shop 3

4  Basic Data  Length15.87 m  Main Rotor Diameter13.20 m  Height4.91 mMax.  Take-off Weight5500 kg  Useful Load2600 kgCabin  Fuel Capacity1100 kg  Performance  Cruising Speed250 km/ hr Max  Never Exceed 295 km/h  Oblique Rate of Climb620 m/min 4

5  AC Electrical Distribution Box  DC Electrical Distribution Box  Filter Transformer Unit ( FTU )  Alternator Control and Protection Unit (ACPU)  Auxiliary Tank Probe  Radio Magnetic Indicator 5

6 6

7  Distributes the complete dc power generation. It contains the main bus through which dc power is directed to the overhead panel through circuit breakers for dc power distribution.  During normal operation, the total dc power from starter/generator is brought to the main bus through Normally Open (N.O.) contactor, which is controlled by GCPU. 7

8  Input sources for DC Master Box:  Starter/generator along with GCPU: 6 KW  Battery (Ni-Cd): 40 Ah  External power source on ground: 6 KW  Types of O/P Buses: Main Bus – 200 A at 28 V DC through  100 A circuit breaker: 1 no.  50 A circuit breaker: 2 no.  3 A circuit breaker: 2 no. 8

9  All grounding/reference lines are connected to a common negative point.  The chassis of the unit is kept isolated from the grounding points.  The bonding points are provided on the unit at the mounting points.  Transient suppressors and free wheeling diodes are also used in PCB circuit design.  The length of the leads/wires is kept as short as possible. 9

10  Over voltage protection test (in normal & environmental condition)  Under voltage protection test (in normal & environmental condition)  Over/Under frequency  Vibration test  Functional test 10

11 External Power Control (EPC) card housed inside the DC Master Box provides the following functions when external power is selected to the Helicopter. Over voltage protection: At 30.5  1 V with a fixed time delay of 0.4  0.1 sec. Reverse polarity protection: If the polarity of the external power is reversed. 11

12 Manual Mode:  Corrected by appropriate design Partial Failure Mode:  One Generator FAIL  NE (Non Essential Bus OFF)  Only TIE Bus ON- Gives Supply to essential parts ONLY. Emergency Mode:  When Both Generators FAIL  Emergency Landing( Within 15 TO 20 Minutes) 12

13 13

14 Functions: Rolling, Pitching & Yawing 14

15 GMC- Conservation of angular momentum Combination of electronics & mechanical portion Supply is 115v A.C. & 400 Hz 15

16 A gyroscope is a device for measuring or maintaining orientation 16

17 Five types of Gyroscopic Instrument:  GA-2M-Gyro Unit  BK53—Erection Cut off Switch  458K/458M-Gyro transmitter  DK-3—Cone Position Transmitter  1122 B: 17

18  Rate of climb  the rate of change of a barometric pressure  static pressure is used  Caliberated leak 18

19 19

20 Indicates the height of aircraft Visual reading on the front dial face Digitized signal to automatic altitude reporting devices 20

21 21


Download ppt "Presented By: FERHAN JAMAL ROLL NO - 0712231033 (E.C. Final Year) 1."

Similar presentations


Ads by Google