1. ST Analysis: Introduction M. Needham EPFL

2. Outline Aims of the meeting Releasing code Performance Monitoring Results (IT and TT): Active fraction, noise rates Problems Header thresholds

3. Aims To get an overview of how well the detector is working Communicate information/known problems Focus on ‘analysis’ part Discuss/understand plots This meeting is dedicated to setting thresholds/Tell1 issues What we are doing now Future meetings driven by needs as we get data, e.g: Alignment Understanding the signal (S/N, cluster shapes)

4. Releasing Code Following is the official release procedure All code should be tested and run before release Test for fpe exceptions Document the code with doxygen/javaDoc comments Update the release notes Provide python support: Update dictionaries Test can instantiate and use all code in a python script Tag the code and add to tag collector https://twiki.cern.ch/twiki/bin/view/LHCb/CVSUsageGuidelines Send email to lhcb-st-soft (and maybe also lhcb-project-trackingsoft)

5. Releasing Code If you don’t follow the official procedure Expect to be named and shamed on lhcb-soft-talk The python support: Catch-22 We are not obliged to provide tested python bindings for all code But python people expect to be able to call all C++ code from python Only way to avoid emails to lhcb-soft-talk Provide python bindings/dicts for all code Test that they actually work [using the class in python is the only way] "That's some catch, that catch-22," he observed. "It's the best there is," Doc Daneeka agreed.

6. Releasing Code It’s a pain and Python has many problems: syntax changes very often [e.g. see material scan script] Many bindings are missing Debugging problems is difficult for non-super gurus see many emails on lhcb-soft-talk Remark : jobOptions moved to python: we all have to use python now

7. Monitoring Performance Perform basic checks on all data we take: Run ZS, NZS, error decoding (already give lots of info) Basic performance checks: STClusterMonitor, STPerformanceMonitor See next slides Keep track of all problems we have For now just a web page for each run I look at http://lphe.epfl.ch/~mneedham/problems/index.php Future ? Savannah, something else ?

8. Monitoring Performance STPerformanceMonitor: Simple representation of where we are Simple C++ algorithm For now two numbers (one versus time): Fraction of the detector that is active (ie could give a cluster) fraction of the detector where I found a bank that I could decode + fraction not flagged as dead in the DetectorElement Occupancy [= noise rate for now] Possible extension: plot showing this ‘per detector element’

9. Results: IT Vfs 1000 Vfs 400 Firmware bug New firmware errors properly handled IT3C not configuring Vfs 400, Lower threshold (S/N ~ 4.5 )

10. Results: IT Problems Loss of sync in source id 76, pp 2, beetle 2 in some runs Sometimes don’t have IT3C as it doesn’t configure Source ID 41 pseudo-header error at low rate Solve by tuning discrimination thresholds Invalid + duplicate clusters: seems solved ? At least in ~100 k events

11. Results: IT Forbidden region 112 - 144 (guess) Forbidden region 112 - 137 (guess) Simple C++ algorithm Masked channels

12. Results: TT New firmware errors properly handled Many PCN errors ? Bad ports/ Beetles masked New firmware bug The HV off

13. Results: TT Problems Source id 106, sync RAM full : pp3 beetle 5 Source id 32 tlklinkloss pp2, beetle 5 Source id 42 pp2 beetle 4 tlklinkloss Source ids 2,3 68 some beetles out of sync Invalid + duplicate clusters: solved or not ? Some may be fixed by digitizer board replacement this week Run 28790 96.5 % 92.9 % 3,32,42 are the problem boards Lost boards

14. Results: TT Masked Channels Tune to 112 and 137 cf IT Bad Beetles Source IDs 32, 42, 106 A little low ? (IT has some ports this low) Alittle high (IT has some ports this high)

15. Summary STPerformanceMonitor useful problem detecting tool Tests described here could be run by ST shift crew ? Many problems solved, many new problems occuring History of performance versus time Pseudo-header thresholds tuned Lots of useful information in beetle headers e.g. Masked and problem channel