Presentation is loading. Please wait.

Presentation is loading. Please wait.

LTE Introduction 0056532 Tzu-chin Liu 15th March 2012.

Similar presentations


Presentation on theme: "LTE Introduction 0056532 Tzu-chin Liu 15th March 2012."— Presentation transcript:

1 LTE Introduction Tzu-chin Liu 15th March 2012

2 Outline Overview Network architecture Protocol stack Resource element
Frame structure TDD frame configuration TDD special subframe MIMO Random access procedure

3 LTE Overview LTE – Long Term Evolution: The 4th generation telecommunication standards. Evolved from the 3GPP system.(R8) RAN: LTE Core: SAE(System Architecture Evolution) Characteristics: Packet switching All – IP network Higher data rate OFDMA based MIMO supported Lte 是什麼? 是現今4G通訊標準之一 由3gpp演進而來 最大的特色: all ip , pkt switching, high data rate, broadband? --- 使用OFDMA, MIMO等技術; duplex有TDD/FDD

4 SAE – System Architecture Evolution
接下來看LTE的network Arch. 一般所說的LTE其實包含了兩套標準: LTE/SAE 其中LTE是定義radio access network, SAE 是定義core network. RAN就是指e-utran這邊 從UE(手機)連上基地台enodeB, 接著才練上核心網 他的core裡有幾個重要的entity: 第一個是mme:

5 Protocol Stack User plane: Control plane:

6 Resource element The basic unit when allocating carrier resource.
Resource Element(RE): One subcarrier by one symbol Resource Block(RB): 12 subcarriers by 7 symbol Resource Element Group(REG): For control plane One REG has 4 or 6 REs.

7 LTE Frame Structure One radio frame has 10 ms: Duplexing:
10 subframes, each of 1 ms. Duplexing: FDD TDD 在傳輸時把時間單位切成一個個的frame 一個frame是10millisec.

8 LTE TDD Frame UL-DL configuration: Special Subframe:
LTE TDD can have 7 UL-DL subframe configurations. Special Subframe: Provide a gap to allow switching from DL to UL a transition subframe. 接下來要講怎麼樣去透過frame的設定來做雙工

9 LTE TDD UL-DL configuration

10 MIMO Multiple-Input Multiple-Output: Better throughput
multiple antennas at both the transmitter and receiver to improve communication performance. Better throughput Longer transmission distance

11 MIMO modes Downlink Transmission Mode:
Release 8 have defined 7 transmission modes.

12 Random Access Procedure
Random access purpose: Set up the RRC (Radio Resource Control) connection when: Idle state or initial power on Handover Synchronization Reset RRC

13 Random Access Procedure

14 Q & A

15 References TDD LTE Air Interfaces v.1
TS GPP System Architecture Evolution (SAE): Security architecture TS Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer procedures TS Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) protocol specification


Download ppt "LTE Introduction 0056532 Tzu-chin Liu 15th March 2012."

Similar presentations


Ads by Google