1. Plastic Its Easy And Simple

2. Plastics – not regarded often as mother earth’s best friends, they are mostly hard to degrade and occupy a lot of space in the landfills. Recycling plastic is one of the most important and easy ways to curb the abuse of plastic and spout bags.spout bags

3. With legal intervention and awareness among people, usage of plastic has decremented. More retailers and users are trying to recycle plastics and encourage users to do the same through incentives. Good manufacturers are also making the plastic recycling process simpler. They ensure that the recycling is done quickly and waste is reused in the process and value chain.

4. The 5 important stages of recycling plastics are: Extruding Plastic Identification Washing The Impurities Plastic Tearing Re-identification of the plastic grades

5. Plastic Identification It is important to note that not every plastic bag can be recycled. Ideally, manufacturers provide engineers the guidance on the kind of plastics that can be recycled. The engineer inspects the elements within a plastic or spout bags. They see the feasibility of possible recycling and decide to move ahead or skip. Indentifying right plastic is a key to success.

6. Washing the impurities After the experts at the manufacturing unit identify the right plastic, it is separated and taken into the next level, where it is cleaned. The cleaning process is tough. Initially, the labels on plastic products or bags are removed, followed by removing the other impurities and adhesives. Its only after the impurities are removed, the good quality recycling can start. Until and unless these impurities are removed the quality of recycled plastic wouldn’t improve.

7. Plastic Tearing It’s time to separate and tear the plastic in the third stage. The waste plastic is loaded onto the conveyor belt which is rolling into the rotating metal having sharp teeth. These metal tear apart the plastic waste into the small pieces, bagged up and then passed on for the next process for a stringent quality check.

8. Re-identification of the plastic grades These badly shredded plastic pieces of once laminated or spout bags are then passed through various chemical tests. These pieces are then reassembled and labeled differently as per the quality of plastics and the grade which they come from. These different grades are classified and blended with other virgin plastics and taken to the next level of recycling.

9. Extruding The process ends when the clean plastic pierces are melted and extruded into the form of pellets. These pallets are then sent to the manufacturing unit, where they are manufactured with the next lot of plastics. This lot is then ready to move out and again get converted to daily plastic usable. Summing it all up, recycling plastic is beneficial in many ways like lesser pollution, better generation, limited extraction of resources and increased use of the same materials. The plastic bags or spout bags that are reusable or biodegradable in nature also help retailers in incurring less cost and at the same time benefit the manufacturer with less production cost. With so much of ease, using plastic bags that are reusable is a must vouch.

10. Postal/Shipping Address: c/o Magcrest Packaging 5 Highview Road Monsey, NY 10952 Call us at: 845-425-0451 Email : info@PlasticBagSource.com