1. Specification of Open Frame Model Name : FCB213WU Revision 1.1 RoHS Compliant Copyright ⓒ 2012 FlatGate Co., Ltd All Rights Reserved.

2. CONTENTS 1. Features -------------------------------------------------------------------------------- 3 2. General Description ---------------------------------------------------------------- 3 3. Block Diagram ----------------------------------------------------------------------- 4 4. Dimension ------------------------------------------------------------------------- 5~6 5. Pin Information ------------------------------------------------------------------ 7~9 6. Reference Data ----------------------------------------------------------------------- 10 7. Setup for Operation (OSD) ------------------------------------------------------- 11 8. Firmware Version Change ------------------------------------------------------ 12 9. Panel Tuning ------------------------------------------------------------------- 12

3. 1. FEATURES State of the art high performance picture quality and low cost design Analog RGB, DVI(option) Full CRT multi-sync monitor compatibility Multi-sync capability up to Full-HD resolution @ 60Hz,compatible standard DOS, VGA,SVGA, XGA and SXGA VESA timing Expand DOS, VGA, SVGA and XGA to full screen display True color(16.7M) data processing and display driving Single control operated On-Screen-Display(hereafter “OSD”) user interface Full control of all relevant display and interface parameters via OSD Multi language support VESA DDC 1/2B compliant Compatible with VESA DPMS power saving modes AUDIO(2W), Stereo input & output Small form factor: 110 x 100 mm +12V/3A DC Single Power: 36 watts AC/DC power adapter recommended Operating temperature: 0 to 65 ℃ 2. GENERNAL DESCRIPTION This FCB213WU board is an advanced TFT-LCD Monitor Control Board, which enables a full replacement of conventional CRT monitor with a large size Active Matrix LCD module. This board, a single layer circuit board, is suitable for video resolution up to Full HD @ 60Hz in all video modes and the display area of the module is fully used. As this model is designed to act as a full monitor interface and to support various TFT-LCDs under the Full HD resolution by BIOS option, the customers can line up their monitors with their own identity. Besides the main function of analog/digital converting in this board the various appealing On-Screen-Display Menu layout is also possible upon customer’s request.

4. 3. BLOCK DIAGRAM Scaler NT68667UFG DC-DC Converter DC-DC Converter OSD Control +5V +1.8V +3.3V Analog RGB DVI (option) TFT LCD Module Inverter LCD Power LVDS Signal +12V +5V +3.3V +12V AUDIO 2W STEREO Speaker AUDIO Input (option)

5. 4. DIMENSION 4.1 Main Board Dimension (110 X 100 mm) ※ option ( DVI, Audio )

6. 4.2 OSD Board Dimension (109 X 21 X 1.6 mm)

7. 5. PIN INFORMATION 5. 1 Pin Connectors 5.1.1 LCD I/F (CN301) for LVDS Single output 5.1.2 LCD I/F (CN403) for LVDS Dual output Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1 VCC9RXE3-17GND25RXO2+ 2 VCC10RXEC+18RXE0+26RXO2- 3 VCC11RXEC-19RXE0-27RXO1+ 4 NC12RXE2+20RXO3+28RXO1- 5 DE13RXE2-21RXO3-29RXO0+ 6 NC14GND22RXOC+30RXO0- 7 GND15RXE1+23RXOC- 8 RXE3+16RXE1-24GND Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1NC6CLK+11GND16YP0- 2 GND7CLK-12YP1+17GND 3YP3+8GND13YP1-18GND 4YP3-9YP2+14GND19VCC 5 GND10YP2-15YP0+20VCC 5.1.3 VGA Input (J103) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1RED5Check Signal9NC13HSYNC 2 GREEN6GND10GND14VSYNC 3BLUE7GND11NC15DDC_SCL 4GND8 12DDC_SDA 5.1.4 VGA Input (CN103) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1HSYNC5BLUE9RED13GND 2 6 10GND 3VSYNC7GREEN11DDC_SCL 4NC8GND12DDC_SDA

8. 5.1.5 DVI Input (CN102) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1 DATA2-7DDC SDA13DATA3+19GND 2 DATA2+8NC14+5V20DATA5- 3 GND9DATA1-15GND21DATA5+ 4 DATA4-10DATA1+16HPD22GND 5 DATA4+11GND17DATA0-23CLOCK- 6 DDC SCL12DATA3-18DATA0+24CLOCK+ 5.1.6 DVI Input (CN304) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1DATA R+6GND11CLOCK-16GND 2 DATA R-7DATA B+12GND17+5V 3GND8DATA B-13DDC SCL18HPD 4 DATA G+9GND14SYNC DET19GND 5 DATA G-10CLOCK+15DDC SDA20GND 5.1.7 AUDIO Input (CN103) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1R-IN2GND3 4L-IN 5.1.8 AUDIO Output (CN105) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1R-OUT2GND3 4L-OUT Pin No.FunctionPin No.FunctionPin No.Function 1GND212V3GND 5.1.9 DC IN (J101) 5.1.10 DC IN (CN101) Pin No.FunctionPin No.FunctionPin No.Function 112V25V3GND

9. Pin No.FunctionPin No.FunctionPin No.Function 1 12V3GND5Backlight On/Off 2 12V4GND6Dim ADJ. 5.1.12 Inverter I/F (J106) 5.1.11 OSD I/F (CN10) Pin No.FunctionPin No.FunctionPin No.FunctionPin No.Function 1Menu4Up7LED_RED10( Right ) 2 Select5GND8Power11( IR ) 3Down6LED_GRN9( Left)12( +5V ) 5.1.13 Touch I/F (CN104) : JP101 Select 5V or 12V Pin No.FunctionPin No.FunctionPin No.Function 1Vcc2GND3

10. 6. REFERENCE DATA 6.1 Limited Values SymbolDescriptionMinMaxUnit VDD +12V DC Power supply11.412.6V IDD Input current0+3.0A Vi(RGB) Video input signal-0.3+1.0V 6.2 Features ParameterValueUnit Overall dimensions Width 110Mm Height 100Mm Max. output resolution 1920 dots x 1080 lines Data processing 8 x 3[R,G,B]Bits Input impedance 75Ohm Video -Ohm Sync Sync polarities +/- Sync levels 5.0V Supply voltage 12.0V Max. number of colors 16.2MColors Operating temperature 0~65°C Storage temperature -20 ~70°C Max.weight T.B.D

11. 7. Setup for Operation The OSD (On Screen Display) provides certain functions to have clear image and others. The control functions defined on OSD operation are as below. 7. Functions on OSD Menu OSD MenuDescription Display Brightnes Contrast Clock Phase H Position V Position Sharpness Adjust the brightness of the screen Adjust the contrast of the screen Adjust the horizontal size of the screen's image Adjust the focus of the screen's image Adjust the horizontal position of the screen's image Adjust the vertical position of the screen's image Adjust the sharpness of the screen's image Audio Volume Mute Adjust volume Adjust mute on/off Color 9300 7500 6500 User Red Green Blue 9300, 7500 and 6500 Temperature and user Temperature, Red, Green & Blue Language Select one of the nine language OSD OSD Time Out OSD Position Transparen Auto Setting Recall Adjust the display time of osd Adjust the position of osd Adjust the transparency of osd Automatically adjust the Horizontal position, Vertical position, Horizontal size, and Phase Window's background or characters should be displayed on your Full screen prior to proceed this function. Initialize to default value Source Analog DVI Select input source one of Analog and DVI. Misc Light Enable Light Contrast Light Bright Light H Start Light H Width Light V Start Light V Width This function is used when highlight special area. Enable or disable the Light window. Adjust the contrast of the Light window. Adjust the bright of the Light window. Adjust the horizontal position of the Light window. Adjust the horizontal size of the Light window. Adjust the vertical position of the Light window. Adjust the vertical size of the Light window.

12. 9. Panel Tuning The table below shows the Data, LCD Name, LCD power, Inverter, Resolution, No. Firmware VersionNote 01 V1.00Reference Firmware 8. Firmware Version Change The table below shows the model names of LCD panel, LCD power, No. DatePanel NamePowerInverterResolution Note 01 2012.05.21LM150X083.3VAT-0150LG1024x7688Bit 02 2012.05.21LM190E08 5VAT-0150LG-75-2P1280x1024 03 2012.05.21LM201U0512VDS-1309WB-18V1600x1200 04 2012.06.01G084SN033.3VFIF1311-01B800x6006Bit 05 2012.06.01HT121X01-3003.3VFIF1311-01B1024x7686Bit 06 2012.06.02LM215WF3 5VGH505A1680x1050 07 2012.06.02LB121S03-TL023.3VAT-0150LG800x6008Bit 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27