1. ITMT 1371 – Windows 7 configuration Chapter 2: Installing Windows 7 ITMT 1371 – Windows 7 Configuration

2. Objectives Select the appropriate installation option Perform a clean installation of Windows 7 Migrate user files and settings to Windows 7 Perform an upgrade to Windows 7 Upgrade Windows 7 editions Create a dual boot installation ITMT 1371 – Windows 7 Configuration

3. Selecting Installation Options Will the current hardware support Windows 7? Will Windows 7 support existing applications? Which Windows 7 edition should I install? Should I perform an upgrade or a clean installation? Should I perform a single or dual boot installation? Do I have to install multiple languages? ITMT 1371 – Windows 7 Configuration

4. Understanding the Windows 7 Boot Environment Windows PE 3.0 – A stripped-down operating system based on the Windows 7 kernel that enables system administrators to boot a computer with no installed operating system and initiate the operating system setup process ITMT 1371 – Windows 7 Configuration

5. Windows PE Advantages Native 32- or 64-bit support Native 32- or 64-bit driver support Internal networking support Internal NTFS support Scripting language support Flexible boot options ITMT 1371 – Windows 7 Configuration

6. What’s New in Windows PE 3.0? Windows Imaging format Size reduction Customization Hyper-V support Scratch space/Ram disk ITMT 1371 – Windows 7 Configuration

7. Using Windows PE Custom deployments System troubleshooting System recovery ITMT 1371 – Windows 7 Configuration

8. Performing a Clean Installation On a new computer that has no operating system On a computer where you have backed up all data and settings and are replacing the existing operating system On a computer that has an operating system that is not upgradeable to Windows 7 ITMT 1371 – Windows 7 Configuration

9. Performing a Clean Installation (cont.) Boot from your Windows 7 installation DVD ITMT 1371 – Windows 7 Configuration

10. Installing Third-Party Drivers If, during a Windows Vista installation, no disk partitions or unallocated space appear on the Where Do You Want to Install Windows? page, you must install the appropriate driver for your disk controller. ITMT 1371 – Windows 7 Configuration

11. Migrating to Windows 7 Windows Easy Transfer tool Wipe-and-Load MigrationSide-by-Side Migration Network or Data Transfer Cable Old Computer New Computer External Storage One Computer ITMT 1371 – Windows 7 Configuration

12. Migrating to Windows 7 (cont.) Windows Easy Transfer tool – Single computer – Wizard base User State Migration – Large enterprise – Command line ITMT 1371 – Windows 7 Configuration

13. Preparing to Upgrade Run the Upgrade Advisor Check hardware compatibility Search for updated drivers Check application compatibility Check disk space Ensure computer functionality Perform a full backup Purchase Windows 7 ITMT 1371 – Windows 7 Configuration

14. Upgrading from Windows Vista With Windows Vista running, insert the installation DVD. If it does not Autorun, you can click Setup.exe to start installation. Make sure to select the UPGRADE option. ITMT 1371 – Windows 7 Configuration

15. Upgrading Windows 7 Editions Purchase full retail version of a higher Windows 7 edition. Purchase a Windows 7 product upgrade. Use the Windows Anytime Upgrade tool. ITMT 1371 – Windows 7 Configuration

16. Performing a Dual Boot Installation You need: – Two disk partitions – Two full product licenses – A full system backup ITMT 1371 – Windows 7 Configuration

17. Install Windows 7 in a Dual Boot Environment Put Windows 7 into the DVD drive. You can boot from it, or put it in while another operating system is running. Do a Clean Installation. Select a separate partition for Windows 7. ITMT 1371 – Windows 7 Configuration

18. Summary – Installing Windows 7 Windows 7 PE (Preinstallation Environment) Windows Easy Transfer In-place upgrade from Windows Vista Dual Boot Installation ITMT 1371 – Windows 7 Configuration 18

19. THE END ITMT 1371 – Window 7 Configuration 19