1. IS20 Instrument System Level 200 Inge Kvalbein Product Expert

2. IS20 GRAPHIC LCD matrix display –Offers a variety of data pages –Depth histogram –NAV motorway –Engine data IS20: Introduction

3. IS20 COMBI –Speed in large characters –Depth in large characters –Depth, speed and temperature, tri-data, in 2 or 3 lines (windows ) –Trip log and passage timer –Race timer and log IS20: Introduction

4. 4 analogue instruments: IS20 WIND IS20 TACK IS20 COMPASS IS20 RUDDER IS20: Introduction

5. Day and night palette provide improved readability in all conditions IS20 instrument system

6. Graphic Datapages The IS20 Graphic is pre-configured with 8 instrument pages, of which 2 are disabled. The instrument will scroll through the pages by using the Up and Down keys. IS20 Instrument system

7. Single (Graphic) instrument with transducer IS20: System overview

8. Expanded system IS20: System overview

9. IS20 Components parts and accessories Wind Transducer Robust, lightweight SimNet wind transducer Quick release mounting system

10. IS20 Components parts and accessories Transducers: DST800, DT800, ST850 (from Airmar) 235KHz active depth transducers Retractable with self closing valve Through hull low profile Note that DT800 has a 12 deg. tilted element

11. SimNet Simrad Intelligent Marine Network 3 SimNet rules: 1.The network must have 12 Volt supply 2.The network must be terminated 3.Reset network also when replacing a transducer

12. IS20 Panel mounting IS20 Installation

13. IS20 Bracket mounting (optional) IS20 Installation

14. IS20 Wind Vane, bracket mounting BOW Cable exit point IS20 Installation

15. Fitting the masthead bracket IS20 Installation

16. Attaching and removing the Wind Vane IS20 Installation

17. Transducer mounting

18. IS20 Installation Cable connection

19. IS20 Installation NMEA0183 input

20. IS20 Graphic First time start-up IS20 Installation

21. Language selection

22. IS20 Installation Changing the units of measure

23. IS20 Installation Automatic source update

24. IS20 Installation Displaying source information

25. IS20 Graphic/Combi Soft keys When the basic operation of the keys are changed, soft key symbols will be displayed right above the keys to indicate the alternate function. IS20 Operation

26. Menu flow chart

27. IS20 Graphic setup IS20 Operation

28. IS20 Graphic, disable pages IS20 Operation

29. IS20 Graphic Enabling a page IS20 Operation

30. IS20 Graphic Data page windows IS20 Operation

31. IS20 Graphic Changing page layout IS20 Operation

32. IS20 Graphic Depth offset The symbol in front of the depth reading will change to indicate that the depth is measured from: the keelorthe water line IS20 Operation

33. IS20 Instrument system Alarm codes

34. IS20 Analog, alarms Alarm ID –ShAL –dEEP –AnCh –chnG –High –Lo –oFF.C –Er.xx –AL.xx Alarm –Shallow water alarm –Deep water alarm –Anchor watch –True wind shift alarm –True wind speed too hi –True wind speed too lo –Off course alarm –Internal error (code) –Any other alarm (code) IS20 Instrument system

35. IS20 has no power button, and will be running as long as power is connected. The IS20 includes a power save function. When power save is activated, the display will be turned off. IS20 Instrument system

36. IS20 Analog 3 arrows at the top of the LCD indicates which function that is displayed. The arrow symbols are identified by legends printed on the scale. The IS20 Analog instruments may show several functions, displayed by using the Up and Down keys. The illustration shows legends used on the IS20 Rudder/Compass instruments to indicate active function. IS20 Instrument system

37. IS20 Wind/Tack Apparent wind speed True wind speed VMG to wind Wind direction Parameter Scale/pointer Apparent wind angle True wind angle Apparent wind angle True wind angle IS20 Instrument system

38. IS20 Technical Specifications Power consumption:1,3 W Display:Backlit LCD matrix display Resolution:130 x 104 pixels Illumination (Red or white): Adjustable in 10 steps Environmental protection: FrontIP56 Back:IP43 Transducers: ”Smart” transducers from Airmar –(DST800 Triducer, DT800 Depth/Temp and ST800 Speed/Temp, analog) –DT800 comes with a 2m cable and Micro-connector and a 1m cable to link to ST800 (Temp not used) –Frequency 235 khz IS20 Instrument system

39. Software upgrade and Service Software upgrade is easily made from a Laptop through a SimNet connector A SimNet-USB Software Upgrade Kit is available; p/n 24006504 Service in the field by replacing complete units IS20 Instrument system

40. IS20 Service/Trouble shooting Service information

41. IS20 Service/Trouble shooting SimNet status

42. IS20 Service/Trouble shooting System data

43. IS20 Service/Trouble shooting Resetting the instrument / system

44. IS20 Service/Trouble shooting

45. Inge Kvalbein Product Expert IS20 Instrument System Level 300

46. 1.One of the instruments does not have a NMEA0183 input port. Which one? 1.Graphic 2.Wind 3.Combi 2.Which instrument has user configurable data pages? 1.Rudder 2.Graphic 3.Combi IS20 Instrument system “exam”

47. 3.What kind of Masthead unit can also be used with IS20? 1.IS12 type 2.IS15 type 3.B&G type 4.Can IS20 have red illumination? 1.No 2.Yes 3.Only the analogue ones IS20 Instrument system “exam”

48. 5.What kind of transducers are IS20 using? 1.Airmar IS12 transducers 2.Airmar IS15 transducers 3.Airmar ”Smart” transducers 6.What is a DST800? 1.Dual speed/temp transducer 2.Depth/speed/temp transducer 3.Distance log transducer IS20 Instrument system “exam”

49. 7.Can IS20 Rudder be used as ”stand alone” rudder indicator? 1.Yes, NMEA0183 and SimNet 2.Yes, NMEA0183 only 3.No 8.Can IS20 be remotely controlled? 1.Yes, by an R3000X Remote 2.Yes, by a WR20 Wireless Remote 3.No IS20 Instrument system “exam”

50. 9.What input data does IS20 need to calculate and display wind direction? 1.Apparent wind angle and true wind speed 2.Apparent wind angle and boat speed 3.Apparent wind angle, boat speed and heading 10.Can IS20 be used for SimNet diagnostics? 1.No 2.Yes 3.Yes, but only Graphic and Combi IS20 Instrument system “exam”